you dont want to. what the plug # and gap your running?
Timing chain diagram or how to set it
about 60-75 mph depends on the company and how the gears are set my friend ran nitro and got 50 horse power and 125 mph on 200cc atv i lied my Roketa RK 200cc 56WS Atv can Go top speed of 60 Mph on 16.3 Horsepower motor 197cc displacement but that is very fast so i love it my friend blowed up his on nitro
if its fuel injected take it to the nearest dealer
To set the timing on a 2005 Suzuki King Quad 700, first ensure the engine is at top dead center (TDC) for the number one cylinder. Remove the timing inspection plug to check the timing marks on the flywheel; they should align with the specified mark in the service manual. If adjustments are necessary, loosen the timing adjustment bolts on the ignition system and rotate the stator plate until the marks align correctly. Finally, tighten the bolts and recheck the timing to ensure it's set properly.
To set the timing on a 1990 Olds Calais with a 2.3L Quad 4 engine, first ensure the engine is at TDC (top dead center) for cylinder one on the compression stroke. Then, locate the timing mark on the crankshaft pulley and the timing tab on the engine. Use a timing light to check the timing; if adjustments are needed, loosen the distributor hold-down bolt and rotate the distributor until the timing light indicates the desired timing mark. Finally, retighten the distributor bolt and recheck the timing to ensure it remains in the correct position.
about 120 mph I disagree with ^ above, a 200cc chopper only goes as fast as the displacement it can average between 65mph and 90mph depending on where it is set at, however a 200cc motorbike could possibly go 120mph with the proper displacement.
Neither its a gear set. Well depending if you have the 2.2 Ecotec or the 2.4 QUAD DOCH. Those engines have timing chains. The 2.0 has 2 gears. one on the crank and one on the cam. The others both have timing chains because they are DOCH 16 Valvers
Pentad
what timing are you trying to set? the cam timing or the ignition timing?
Timing is set by the PCM and not adjustable.
Timing is set by the PCM and is not adjustable.
Timing is set by the PCM and is not adjustable.