how do you change the rotor in 2000nisan xterra
with a 14mm wrench
you cant. the are superglued on!
If your rotors need turned (nowadays it's usually better to replace them, and some can not be turned at all), take them to a shop that has the proper equipment. They can look up the specs.
To replace the front rotors on a 2006 Nissan Titan, first, lift the vehicle and remove the front wheels. Next, remove the caliper by unbolting it and safely hanging it to avoid stress on the brake line. After that, take off the caliper bracket and remove the old rotors; if they're stuck, gently tap them with a hammer. Finally, install the new rotors, reattach the caliper bracket, and caliper, then put the wheels back on and lower the vehicle.
2003 Nissan xterra supercharged replace front rotors
pull off the front wheels. remove the calipers. remove the two screws that hold on the rotors. replace the rotors and reverse the procedure.
Jack up car, secure on jackstand, Remove wheel, remove two mounting bolts that secure the calipers. Slide calipers out of rotors and hang caliper in a way not to strain brake hose. Pull Rotors off and change for new ones. If you want to change pads, Remove two retaining bolts on the caliper that hold the pads, remove and replace them.
Remove wheels Remove 2 caliper mounting bolts Slide caliper off rotors Rotors should slide off hub
Remove the tire and wheel from your 1997 Mitsubishi Montero. Remove the brake shoe assembly. Tap on the rotors to loosen them. The rotors will slide off. Reverse the process to install your new rotors.
break them into pieces after drilling them and just slide them off.
Sometimes you can have a a pulsation while the brakes are adjusting after you have turned the rotors. You could wait a couple days and see if it corrects itself.