I just did this last week, and my hands are still recovering. You're gonna need to download the service repair manual, which is worth it. The short version: you'll remove pulleys and disconnect fuel rail, remove oil tube and alternator brackets, and pick the whole engine up about 4 inches to get the alternator up through the top. Good luck!
To change the alternator belt on a 2003 Mitsubishi Lancer, first, disconnect the negative battery terminal to ensure safety. Then, loosen the tensioner pulley by turning the adjusting bolt and remove the old belt from the alternator. Install the new belt by routing it over the alternator and other pulleys according to the belt routing diagram, then adjust the tensioner to apply proper tension to the belt. Finally, reconnect the battery terminal, start the engine, and check for proper operation.
You remove no pulleys. Just loosen the belt and then remove the alternator.
Remove the wiring harness from the back of your 2003 Mitsubishi Eclipse alternator. Loosen the alternator tensioner bolt. Remove the alternator belt. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
a press
Wilson the alternator belt. With the tensioner pulley. Remove the wiring harness from the alternator. Remove the four alternator retaining bolts.
Here´s the answer..http://forums.evolutionm.net/lancer-how-tos-installations/297464-how-amplifier-installation-remove-radio.html
To replace the alternator belt on a 1990 Mitsubishi Mirage, first, disconnect the battery to ensure safety. Loosen the tensioner bolt and the alternator mounting bolts to release tension on the old belt. Remove the old belt and install the new one, ensuring it's properly seated on the pulleys. Finally, adjust the tension by repositioning the alternator, tighten the bolts, and reconnect the battery.
boi bangs
Begin by removing the belt from your 1999 Mitsubishi Eclipse alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
go to file manager and remove it man
remove the broken one and replace with a new and working bulbs.