0
To install new struts in a 1994 Pontiac, start by safely lifting the vehicle and removing the front wheels. Disconnect the strut assembly by removing the bolts at the top mount and the lower control arm. Replace the old strut with the new one, ensuring all components are properly aligned. Finally, reattach the wheels, lower the vehicle, and perform a wheel alignment to ensure proper handling.
What else can I help you with?
How do you change the front drivers side strut on a 2002 Pontiac Grand Am?
You will need to compress the 2002 Pontiac Grand Am strut spring with a spring compressor. Remove the top and bottom strut retaining bolts. Reverse the process to install the new strut.
How are the struts on a 92 Pontiac Le Mans 1.6 liter removed?
unbolst strut from the vehicle. compress the springs with spring tool. take large nut from top of strut assembly. remove spring from assembly. use tool to unscrew the top of the strut cartridge. slide top off of strut piston. take strut cartridge out and replace with new one. then revers the steps.
How do you replace a strut on an aztek?
To replace a strut on a Pontiac Aztek, first, safely lift the vehicle and secure it on jack stands. Remove the wheel and brake components to access the strut assembly. Unbolt the strut from the knuckle and the top mount, then replace it with the new strut, ensuring all bolts are tightened to the manufacturer's specifications. Finally, reassemble the brake components, reinstall the wheel, and lower the vehicle.
Why is my rear tire rubbing on the shock absorber?
I have had that problem on my 1994 Chrysler LHS. Your strut is actually broken, the pan which holds the spring in place has poor welds and can snap. You should get a new strut.
Should you replace the strut mounts when changing the struts?
Yes, it is generally recommended to replace the strut mounts when changing the struts. Strut mounts can wear out over time and may contribute to noise, vibration, and poor handling if not replaced. Installing new mounts along with the struts ensures that the entire assembly functions optimally and can help extend the lifespan of the new struts.
After installing a new battery in 1994 BMW how do you turn off the alarm?
take the battery back out
1985 camaro strut mount bracket doesnt fit new strut mount i cant find a new strut mount bracket at the dealer or NAPA where can i get a new strut mount bracket?
E-Bay?Hemming's Motor?
Replace struts on 2003 town and country?
You will need to compress the strut spring with a spring compressor. When the strut spring is compressed remove the strut retaining bolts. There is a strut retaining bolt on the top and the bottom of the strut assembly. Reverse the process to install the new strut.
How do you change front struts on 2003 sunfire?
To change the front struts on a 2003 Pontiac Sunfire, first, safely lift and support the vehicle, then remove the front wheels. Disconnect the sway bar link and the lower strut bolt, then remove the upper strut nuts from the strut tower inside the engine bay. Once the old strut is free, replace it with the new strut, reassemble everything in reverse order, and ensure all bolts are torqued to specifications before lowering the vehicle. Remember to check wheel alignment after completing the job.
Install front stuts 91 Pontiac sunbird?
To install front struts on a 1991 Pontiac Sunbird, start by safely lifting the vehicle and removing the front wheels. Next, disconnect the strut assembly from the steering knuckle and any attached components, such as the brake line and sway bar link. Remove the strut mounting bolts from the top of the strut tower under the hood. Finally, replace the old struts with new ones, reassemble all components in reverse order, and ensure everything is securely tightened before lowering the vehicle.
How To Replace VW Golf Hatch Strut?
Begin by compressing the strut spring with a spring compressor. Be very careful as the strut spring will be under hundreds of pounds of pressure. Remove the strut retaining bolts. Reverse the process to install your new strut.
1994 Mazda mx3 how to change front shocks?
To change the front shocks on a 1994 Mazda MX-3, first, safely lift the vehicle and remove the front wheels. Then, disconnect the sway bar link and the strut assembly from the steering knuckle. Remove the top strut mount bolts from the engine bay, then carefully extract the strut assembly. Install the new shocks by reversing the process, ensuring all bolts are tightened to the manufacturer's specifications before reattaching the wheels.
