answersLogoWhite

0

This largely depends upon the condition of the mounting studs. If they are clean, it's easy; if they are bad enough, they might require cutting off and new studs.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

How do you change the exhaust manifold gasket on a 93 Chevy astro van?

You will need to remove the exhaust manifold retaining bolts in your 1993 Chevy Astro. Remove the exhaust manifold. Remove the exhaust manifold gasket and clean the surface. Reverse the process to install the new exhaust manifold gasket.


Can you change the o2 sensor on a venture yourself or is it too hard to get to the exhaust manifold?

if you can replace it yourself but do it right look on the web for info vids


What is the trick to change front cat converter on 08 jeep compass?

There are no tricks. It is part of the exhaust manifold.There are no tricks. It is part of the exhaust manifold.


How hard is it to replace exhaust manifold pass side on a 2008 ford F150 5.4L?

It is very hard.


How do you change an S10 exhaust manifold?

The exhaust manifold on a Chevy S10 truck is changed by removing the spark plugs, unbolting the manifold from the cylinder heads, and unbolting the collector. The manifold can then be removed from the vehicle and a new set put in its place.


How do you change exhaust manifold on 2001 olds?

To change the exhaust manifold on a 2001 Oldsmobile, first, disconnect the battery and remove any components obstructing access to the manifold, such as the intake or engine covers. Then, detach the exhaust pipes and unbolt the manifold from the cylinder head while ensuring you have a proper gasket for reinstallation. Replace the old manifold with the new one, reattach the exhaust pipes, and reconnect any components you previously removed. Finally, reconnect the battery and check for any exhaust leaks.


How do you remove an exhaust manifold?

You just unbolt it. You first have to disconnect the exhaust pipe from the manifold then remove whatever you have to allow you to access the bolts and remove the manifold. It varies greatly from engine to engine. Some are easy and some are very hard.


How do you install an exhaust manifold on a Renault?

The exhaust manifold needs to have a gasket in place to help seal the juncture between the manifold and the engine. After the gasket and gasket sealer are in place, tighten the bolts for the exhaust manifold. The exhaust pipe can then be replaced on the new exhaust manifold.


What is the purpose of an exhaust manifold?

The purpose of the exhaust manifold is to connect the exhaust ports on the cylinder head to the exhaust pipe.


1996 Nissan Pathfinder change exhaust manifold?

What engine???????? You should refer to repair manual if not familiar with auto repair and understand the terminology before attempting Remove nuts holding exhaust manifold to cylinder head & remove nuts/bolts holding exhaust manifold to exhaust pipes Use new exhaust manifold gaskets and install the new manifold securing the manifold to cylinder head (may need to but new nuts and or bolts) by "snugly" tightening manifold to cylinder head if not refering to repair manual


Where is a exhaust manifold ona 2002 Malibu?

exhaust manifold is where exhaust pipe hooks to engine!


Where is the oxygen sensor in a 94 caravan?

In the exhaust manifold behind the engine.In the exhaust manifold behind the engine.