answersLogoWhite

0

A good oil additive to help stop engine tapping is a high-quality engine oil supplement that contains additives like zinc or molybdenum, which help reduce friction and wear. Products such as Lucas Engine Oil Stop Leak or STP Oil Treatment can also be effective in conditioning seals and enhancing lubrication. It's important to ensure compatibility with your engine oil and follow the manufacturer's recommendations for use. Additionally, addressing the underlying cause of the tapping, such as low oil levels or valve adjustments, is crucial for a long-term solution.

User Avatar

AnswerBot

3mo ago

What else can I help you with?

Related Questions

What would cause valve tapping in a Chevy s-10 1988 2.5 engine?

Oil Slug is one of the main causes of a lifter tapping. Something that would up help clean the slug would be an Engine Flush, called Auto-RX. I have never used it but have heard many good things about it and it is made in the USA. Hope This Helps.


What is the additive's number identity?

Zero! good job! if you re using this for your HW it will help! <3


Is there an additive to help if you put gas in a diesel engine?

No. Fuel tank needs to be dropped and entire fuel system flushed.


What number is called the additive identity?

Zero! good job! if you re using this for your HW it will help! <3


Why is there is a tapping sound coming from your fiat punto engine and it increasing as you increase speed what could it be?

The noise has been coming from the engine for the past week and I have been told it might be the oil pump not providing oil to the sump. The tapping sound comes from the engine and increases when i change into a higher gear and drive faster. Please help!


How does Chevron gas with Techron help improve engine performance and fuel efficiency?

Chevron gas with Techron contains a special additive that helps clean and protect your engine's components, leading to improved performance and fuel efficiency. The additive works to remove deposits and buildup in the engine, allowing it to run more smoothly and efficiently.


You have consiterable blow by on your 1991 ford 302 is there any additive that will help?

Not typically. Sometimes, if engine oil has not been changed regularly, you can run a cleaning additive with the oil and break loose some of the sludge that may be holding the rings from making a good seal in the cylinder. Typically that doesn't work so don't have too much expectation. It's usually caused by worn rings and the only solution is to rebuild the engine.


How can one effectively remove water from gasoline to ensure optimal engine performance?

To effectively remove water from gasoline for optimal engine performance, you can use a fuel additive specifically designed to absorb and remove water from the fuel. This additive will help prevent water from causing issues in the engine, such as decreased performance and potential damage. Additionally, regularly draining and replacing the fuel in the tank can also help remove any water that may have accumulated.


Would a fuel additive help the fuel pump?

no


You get tapping noise when your engine gets warm?

A tapping noise when your engine warms up could indicate several potential issues, such as low oil levels or oil viscosity that is too thin, leading to insufficient lubrication of engine components. It might also be a sign of valve lifter problems, worn bearings, or other internal engine wear. If the noise persists, it’s advisable to have the engine inspected by a mechanic to prevent further damage. Regular maintenance and oil changes can help reduce the likelihood of such issues.


Why is tapping when trapped after an earthquake better than shouting for help?

Tapping when trapped after an earthquake is often considered better than shouting for help because tapping can create a more distinct and localized sound that rescuers can potentially hear amidst the rubble. Additionally, tapping can be sustained for longer periods of time compared to shouting, which may help rescuers pinpoint the location of the trapped individual more accurately. Moreover, tapping can be a more energy-efficient method of signaling for help, as shouting can lead to exhaustion more quickly in a high-stress situation.


Why does your 1991 park avenue tick when cold quiets after five minutes?

the tick is your lifters not getting oil to them.oil getting thick due to cold and not warming up. change oil with a 5w30 and an additive.lucus oil additive is good to help get rid of the ticking.and you will have to keep additive when changing oil.to keep ticking away.only way to truly fix the noise.is to change the lifters.which cost more and engine work.hope this helps

Trending Questions
Where can you find a diagram of the fuse box on a 1989 Cadillac Fleetwood? Right rear and which front brake do you bleed on 98 windstar? How do you test for exhaust fumes in the coolant? How do you replace the brake light switch on a 2006 Chevy Aveo? How tight should bolts be so oil wont leak from valve cover? How to stop an oil leak? What does P0400 OBD trouble code mean and how do you repair it? What happens if you accidentally pour transmission fluid into brake fluid? Is an 8 ohm sub woofer better than a 4 ohm sub woofer? How often do you change the oil on a Yamaha yz 250f? How do you get a drag car to get a good launch with the trans brake? Why does my Car makes a loud humming sound under bonnet it kicks in when im at about 70kmhr and stays round when i go faster does not get louder softer as accelerate decellerate 92 Ford Laser? What is the replacement spark plug for a Torch A6RTC? What is the difference between rn14mc5 and rn14pmp5 spark plug? What makes a 86 ford ranger 2.9 engine miss fire and run rough on one cylinder still after replacing plugs wires and cap wires are put back correctly? Are blue headlights illegal in Arizona? Do it yourself oil change on 1996 Chevrolet S10? What socket needed to remove Mercedes rear caliper? Why is the wiring harness for a jeep Cherokee with right hand steering different than a left hand steering model? What would cause rear brakes to get abnormally hot and smell like burnt rubber after a break change on a 1995 240sx?