The car stereo wiring colors for a 1988 Cadillac El Dorado with Bose are gray for right front speaker positive. Light green for right front speaker negative. Dark green for audio rear speaker positive and brown for rear speaker negative.
For a 1980 Datsun 720 King Cab pickup, the stereo wiring typically involves connecting the power wires, speaker wires, and ground. The power wire (usually red) connects to the ignition switch or battery for 12V power, the ground wire (black) connects to a metal part of the chassis, and the speaker wires (various colors) connect to the corresponding speaker terminals on the stereo. It's essential to refer to a specific wiring diagram for your model, as color codes may vary slightly. Always ensure the vehicle's battery is disconnected during installation for safety.
Remove the retaining cover from your factory stereo. Remove the factory stereo retaining bolts. Slide the factory stereo out. Remove the wiring harness and the antenna cable from the back of the factory stereo.
The factory stereo wire colors for a 1977 Chevrolet Caprice typically include the following: the constant power wire is usually yellow, the ignition power wire is often red, the ground wire is usually black, and the speaker wires can vary but commonly include blue and green for the front speakers, and gray and purple for the rear speakers. It's always recommended to verify with a wiring diagram specific to the vehicle, as wire colors can vary by model and production changes.
Remove the 2002 Dodge Durango factory stereo decorative cover. Remove the factory stereo retaining screws. Pull the factory stereo out. Remove the wiring harness and the antenna cable from the back of the stereo.
if your not going to use the old factory stereo, take it apart and you will find that the circit board is labled where it plugs in. Or go to your nearest stereo shop and get a wiring harness for $20.
Use a line out converter spliced into the rear speaker wires to connect RCAs to a sub amp.
An electromagnet drives the stereo speaker to provide the sound.
U just take out and slide in the new one!
if the speakers are the right size for the stock location, pull out the factory speaker and eather buy a special conector or cut the original conector off and get new wire and but splice the new wire to the factory wire and attact to the speaker.
The 2001 Toyota stereo wiring uses five different colors. The red wire will be for the positive wire. The black wire is the ground wire. The stereo speaker wires are yellow and green. The auxiliary wire is white.
The faux rock speaker systems will provide comparable sound quality to that of an average stereo speaker.