0
What is the torque on the intake of a 1993 Oldsmobile Achieva with a 3300 engine?
There are 10 bolts holding the intake manifold onto the engine block. Five on the back and five on the front. If you letter the bolts A through J from left to right, rear side then front, you get the tightening sequence below. Tighten bolts in the number sequence shown. A-7, B-3, C-1, D-5, E-9 F-8, G-4, H-2, I-6, J-10 Torque bolts to 88 in-lbs, making two passes in sequence.
What else can I help you with?
What are the intake manifold torque specs for a 403 ci Oldsmobile engine?
Intake manifold torque specifications for the Olds 403 is listed as 30 ft-lbs.
What are the Cylinder head torque specs 1996 Oldsmobile 2.2 liter?
What are the torque specificatons for a 1996 v6 3.1 head on an oldsmobile achieva
What are the intake manifold torque specs on 1997 Oldsmobile bravada?
What are the intake manifold torque specs on 1998 Oldsmobile bravada?"
What are the intake manifold torque specs for the 1996 Oldsmobile achieva 3100 V6?
Haynes manual says 115 inch pounds- Start from center of intake using a criss-cross pattern, working your way to ends of intake.
What are the torque specs for the intake manifold fuel injection and valve adjustment on a 1996 Oldsmobile Cutlass Ciera 3.1L engine?
the torque specs for the intake manifold are 115 inch pounds inch pounds to newton meter = mutiply .113 by the number of inch pounds aprox. 9.5 foot pounds
What are the Cylinder head torque specs for a 403 ci Oldsmobile engine?
95 ft/lbs.
How to replace intake manafold on V6 3800 engine?
Ineed the torque sequence and tightening specs for a 92 GM 3800 intake.
What are the rocker arm torque specifications for a 455 cubic inch Oldsmobile engine?
According to most Oldmobile torque specs, the correct torque for rocker arm bolts is 25 ft-lbs.
What is the intake manifold torque on a small block Chevy?
Need to know the year and engine size.
What are the Torque specs for intake and plenum tubes bolts on corvette 5.7 liter TPI engine?
== ==
How much hp does a 3.4 engine have?
The 3.4L LA1 V6 engine in the Oldsmobile Alero puts out 170 hp and 210 lb-ft of torque.
What is the torque setting for the lower ball joint on a Oldsmobile 88?
What year is the oldsmobile?, and do you need the torque setting for the nut?.
