Misfire
Answer
Faulty: spark plug, spark plug wire, ignition coil, ignition module, fuel injector are the most common. Coolant leaking into a cylinder is another.
Internal engine problems such as burnt valve, broken valve spring, bent push rod, worn rings
What's wrong with my 2003 Chevy Cavalier if the check engine lights on and a friends computer said "misfire cylinder 4 "? It studders also. thanks Dawn
It depends on what caused the misfire, and it depends on what you mean. If you are having constant misfires, then there is either something wrong with your ammo, or there is something wrong with the pistol. If you mean what is the proper procedure for clearing a misfire, then you keep the gun pointed in a safe direction and rack the slide to eject the bad round, or open the cylinder and eject it if it is a revolver.
Likely a stuck ring allowing blowby from the cylinder.
I'd suspect a bad spark plug at first. Which could be the GAP setting is wrong or the plug itself is bad. There can be other more expensive issues going on, but I'd start cheap and work up.
The engine , if it runs at all , will , of course , have misfires and may have a 'backfire' .
Weak ignition coil? valve (intake) hanging up at times not allowing fuel mixture to enter combustion chamber?
What size engine? 3100 motors are fairly common for fuel injectors that need professional cleaning. Ignition coil pack may be another source, coolant getting into the cylinder. When you pulled the plugs out which cylinder had the black carbon build up? That is your troubled area.
No....The engine mounts are in the wrong place.
oxygen senser
No,car will not run rich.Infact it gives misfires since escaping fuel will be the ultimate result if we use wrong spark plugs.
i have a 1996 millennia s with 2.3 and it is the last cylinder on the back on the drivers side. I had many problems with someone giving me the correct answer. Some dealers even give the wrong info. Most manuals are wrong.
anything with angles does have vertices * * * * * The circular base of a cylinder meets the curved surface at an angle of 90 degrees. So there are an infinite number of angles, but not a vertex in sight. Something wrong with your statement, perhaps!