There are no spark plugs wires on cts [03 for sure] the coils set direct on top of plugs. Intake manifold has to be removed to get to them.Also thermostat is in that area.
Reply::
On a 2003 Cadillac CTS, there is NO spark plug wires. There is no need in removing the intake manifold, the coilpacks set on top of the spark plugs, the only thing you have to remove on the driver side is the Power Steering pump reservoir to gain access to the coil packs. There is only two bolts that hold the coilpack in place. Use extreme caution when removing colipacks due to them having springs attached to each coil. On the passenger side you have to remove a couple of brackets that hold the wiring harness in place, repeat on the driver side as well. There is DEFINETELY NO need to remove the intake manifold!
I hope this is helpful and saves you alot more time and money.
Regards: A 2003 Cadillac CTS Owner.
A 2000 Concorde does not have plug wires. There are individual coils on each spark plug.A 2000 Concorde does not have plug wires. There are individual coils on each spark plug.
The spark plug wires on your 1994 Chevrolet Caprice are quite easy to change. The spark plug wires simply lift off on each end. Put the new spark plug wires on and push until you feel a click.
There are electrical wires all around the vehicle. If you are looking for spark plug wires, it does not have any. It has individual coils directly on each spark plug.There are electrical wires all around the vehicle. If you are looking for spark plug wires, it does not have any. It has individual coils directly on each spark plug.
at the end of the spark plug wires
OEM are the best spark plug wires for the Honda cbr. These spark plug wires can be found at the local Honda dealership.
There are no spark plug wires, this is a coil on plug system. The spark plugs are under the coils that bolt to the middle of the valve covers.There are no spark plug wires, this is a coil on plug system. The spark plugs are under the coils that bolt to the middle of the valve covers.
Yes, if the spark plug wires can be connected to the distributor and works.
Changing the spark plug wires in your 1999 Mercedes-Benz is quite simple. The spark plug wires simply lift off. The new spark plug wires can be pushed onto the spark plug. It is best to change one wire at a time.
DEPENDS ON THE YEAR AND MOTOR,DO YOU HAVE SPARK PLUG WIRES?IF NOT,THEN YOU HAVE A SEPERATE COIL FOR EACH SPARK PLUG THAT SITS ON THE TOPS OF THE PLUGS,IF YOU DO HAVE SPARK PLUG WIRES THEN JUST FOLLOW IT FROM THE SPARK PLUG TO THE COIL!HOPE THAT HELPS
Disconnect the battery, and remove the spark plug wires one by one. Replace the spark plug wires in the same order, ensure the connection is firm, and connect the battery.
Disconnect the battery, remove the spark plugs wires and boots and remove the spark plugs. Put in the spark plugs, replace the spark plug wires and boots, and connect the battery.
all the spark plug wires go to the distributor.