0
What else can I help you with?
How do you remove stater selinoid on kawasaki mule 550?
How do you remove the starter selinoid on a kawasaki mule 550, 2000 model
Wiring Diagram For Kawasaki Mule 550?
The wiring diagram, of a Kawasaki Mule, 550, can be obtained from most Kawasaki dealerships. The wiring diagram can be purchased at most auto-parts stores.
Adjusting governor to get more speed on 550 kawasaki mule?
You can adjust the governor, on your 550 Kawasaki Mule, by increasing the fuel to the carburetor. The fuel adjustment screw is on top of the governor.
Twhere is the engine oil drain plug on a kawasaki 550 mule?
passenger side of engine.
Why won't the kawasaki mule 550 start even with a new battery?
it might be the Neutral safety switch
What is the oil capacity on 550 kawasaki mule?
The oil capacity of the Kawasaki Mule 550 is approximately 2.0 quarts (1.9 liters) when using the oil filter. It's important to check the owner's manual for specific maintenance recommendations and ensure proper oil type and level for optimal performance.
What is the napa filter replacement for a kawasaki mule 550?
It's a Napa Gold 1394 or Napa Power Sport PS1394
How do you set parking brake on kawasaki mule 550?
To set the parking brake on a Kawasaki Mule 550, first ensure the vehicle is in a stationary position. Pull up the parking brake lever, located between the driver's seat and the center console, until it is fully engaged. You should hear a click indicating that the brake is locked in place. Always check that the brake is securely set before leaving the vehicle.
How to release the brake adjustment to remove the rear brake drum on a kawasaki mule 550?
Yeah I'm having same problem did you ever fugure it out?
What type of engine oil does a kawasaki mule 550 use?
The manual says to use 10w40. 1.3 liters w/ filter change. 1.1 without.
What type of oil for a kawasaki mule 550 and What is the oil capacity?
The manual says to use 10w40. 1.3 liters w/ filter change. 1.1 without.
How do you change oil in a kawasaki mule 550?
To change the oil in a Kawasaki Mule 550, first, warm up the engine slightly to thin the oil for easier drainage. Then, turn off the engine, remove the oil drain plug located under the engine, and let the old oil drain completely into a suitable container. Replace the drain plug, then remove and replace the oil filter. Finally, refill the engine with the appropriate type and amount of new oil through the oil fill cap, and check the oil level with the dipstick.
