0
Why does your temp gauge change all the time When the thermostat has already been changed?
I had this problem on a 2001 Ford Fiesta. I ended up having to get the temparature gauge sender unit replaced.
What else can I help you with?
Why does your temp gauge go up and down did get new rad and changed thermostat?
yes
Your temp gauge stays in hot Flushed radiator changed heat sensor and replaced thermostat to no avail?
Test gauge function with a mechanical gauge to get actual engine temp.
Why is your temp gauge not working?
i change the thermostat and the temp switch but still not working
When the thermostat gauge stops working is it just the gauge or the thermostat?
most likely the gauge
90 maxima overheating i changed the thermostat but the temp gauge rises to hott but theres no heat in the car?
that is not a question
Why does your car rev up and temperature gauge show cold?
Thermostat is gone, change it
Temp gauge not going up like it use to on 2000 kia sportage?
Change your thermostat.
Why does the temperature gauge on your car fluctuate?
The temperature gauge on a car fluctuates because the car's thermostat is opening and closing. The gauge goes up when the thermostat closes and the gauge goes down when the thermostat opens.
Why would thermostat temperature stays constant when heat is on and never moves up?
Not sure what you really mean but if temp of heat does not change = likely bad thermostat etc. If gauge does not work at all but heat is fine then gauge or electrical type problem to the gauge
Why would the temp gauge show hot even though its not on a 2001 Pontiac Aztek changed thermostat intake gasket and temp sensor?
thermostat may be sticking and that cause the gauge to show hot, have it checked soon, you could be headed for bigger problems
What gauge wire should be used for a thermostat installation?
For a thermostat installation, it is recommended to use 18-gauge wire.
1993 ford explorer limited edition temperature gauge always reads cold Changed thermostat but this is not the problem What might be wrong and how would you fix it?
check the connections behind the gauge they could pop loose
