i have replaced my clutch to 10.5 diemter ,can i re use the morso flywheel/clutch bolts
55ftlbs
1997 S10 4 cylinder engine pressure plate to flywheel bolts, 33 ft lbs.1997 S10 V6 engine pressure plate to flywheel bolts, 29 ft lbs.
pressure plate to flywheel bolts - 15 to 24
24 Foot Lbs on clutch cover bolts. 85 Foot Lbs on flywheel bolts. Use lock tight on both set of bolts.
If the bolts are 3/8-16, the torque would be 50 ft/lbs. If 7/16, 65 ft/lbs.
35 ft. lbs. on the intake, and 70 ft. lbs. on the flywheel.
what is the torque for the bolts on the clutch springs for a trx 90/>
You have to pull the transmission. then it's just 3 bolts/nuts through flywheel.
The torque settings for the Suzuki Samurai flywheel bolts are typically around 70-80 ft-lbs (95-108 Nm). For the clutch pressure plate bolts, the recommended torque is usually about 15-20 ft-lbs (20-27 Nm). Always consult a specific service manual for your model year to ensure accuracy, as specifications may vary slightly.
For a 1993 Honda Del Sol, the torque specifications for the flywheel bolts are typically around 70 lb-ft (95 Nm). For the clutch pressure plate bolts, the torque specification is usually about 16 lb-ft (22 Nm). Always refer to a service manual for your specific model to confirm these values, as they can vary slightly based on the engine type or modifications.
The torque specs for a 235 Chevy include main cap bolts of 100 - 110. Its bellhousing bolts are 45 - 55, flywheel bolts of 50 - 65, and rod nuts of 35 - 45.
Torque converter bolts No. Fly-wheel bolts YES.