mine has one on each side
The 2002 Tacoma engine block will have two coolant drain plugs on each side of the block. The coolant drain plugs will be near the front and the rear of the engine block.
There are none.
You drain coolant from the radiator. but according to the book ther are two plugs on the engine block that need to drain the coolant from.
The 1994 Lincoln Town Car 4.6 liter engine coolant drain plugs can be found on each side of the engine block. There will be a total of four engine coolant drain plugs.
Ive never heard of draining coolant plugs except on a diesel engine . Once you drain the coolant and flush the system it should be fine
There are two block drain plugs, one on each side of the block, close to the motor mounts and oil pan.
block heaters are kinda hard to install. you would have to drain your coolant and take out one of the freeze plugs. that's were the block heater gets put in to warm the coolant in the block.
There should not be a coolant drain on the engine block. You are probably looking at a freeze plug which should NOT be removed. The freeze plugs where openings for the original production/casting of the engine block and are sealed.
The is no drain plug on the engine block. The only "plugs" there is, are freeze plugs, but those have to be knocked out and replaced with new ones, if you want to remove them.
Wear is drain plug on 1997 GMC 7.4
drain coolant from radiator, remove one of the frost plugs in engine block, install block heater in place of frost plug, refill radiator with coolant.
The small plugs, on both sides of the engine block, at the rear edge of the motor mounts. A pita to drain. You have to remove the motor mounts.