answersLogoWhite

0

Well, honey, to clear the code on a Cadillac Eldorado 1999 for the service stability system, you'll need a fancy OBD-II scanner. Plug that bad boy in, find the option to clear codes, and let it work its magic. Just remember, clearing the code won't fix the underlying issue causing the stability service light to come on, so you might want to get that checked out too.

User Avatar

BettyBot

8mo ago

What else can I help you with?

Related Questions

How do you clear codes no a 1994 Cadillac eldorado touring?

To clear codes on a 1994 Cadillac Eldorado Touring, you'll need to disconnect the vehicle's battery. Start by removing the negative battery cable and waiting for about 10-15 minutes to ensure that the engine control module (ECM) resets. Reconnect the cable, and the trouble codes should be cleared. Alternatively, you can use an OBD-I scanner to clear the codes directly if you have one available.


What size gas tank does a 1997 Cadillac Eldorado have?

They hold around 20 gallons. If you run it clear dry you might squeeze 22 gallons in there.


How do you clear the message center computer on an Cadillac Seville 1987 Message has bento owner's manual 2 service now?

How do you clear the message center computer on an Cadillac seville 1987 Message has bento owner's manual 2 service now?


How do you reset the computer on a 1992 Cadillac Eldorado?

To reset the computer on a 1992 Cadillac Eldorado, you can disconnect the negative battery terminal and leave it disconnected for about 10-15 minutes. This will clear any stored diagnostic trouble codes and reset the engine control module (ECM). After reconnecting the battery, start the vehicle and allow it to idle for a few minutes to re-establish normal operating parameters.


How do you reset the computer on a 1991 Cadillac Eldorado?

To reset the computer on a 1991 Cadillac Eldorado, disconnect the negative battery cable for about 10-15 minutes. This will clear the computer's memory and reset any stored trouble codes. After reattaching the cable, start the vehicle and allow it to idle for a few minutes to let the computer recalibrate. Lastly, drive the car gently for a short distance to help the system adapt to normal operating conditions.


How do you replace a map sensor on a 1983 Cadillac Eldorado?

To replace the map sensor on a 1983 Cadillac Eldorado, first, locate the sensor, typically found near the intake manifold. Disconnect the electrical connector and remove any mounting screws to take out the old sensor. Install the new sensor by reversing the process—secure it in place and reconnect the electrical connector. Finally, ensure all connections are tight and clear any diagnostic codes if applicable.


What is an easy fix for code so38 on Cadillac eldorado?

Code SO38 on a Cadillac Eldorado typically indicates a problem with the vehicle's anti-lock brake system (ABS). An easy fix can often involve checking and cleaning the ABS wheel speed sensors and their connections, as dirt or corrosion can lead to faulty readings. Additionally, ensuring that the brake fluid level is adequate and that there are no leaks in the brake system can help resolve the issue. If these steps don't clear the code, further diagnostics may be needed to identify underlying issues.


How do you reseta 1996 Cadillac Eldorado computer system after self servicing?

To reset the computer system of a 1996 Cadillac Eldorado after self-servicing, disconnect the negative battery terminal for about 15 minutes to clear any stored error codes and reset the system. After reconnecting the battery, turn the ignition to the "On" position without starting the engine for a few seconds to allow the system to recalibrate. Finally, start the engine and let it idle for a few minutes to ensure everything is functioning properly. If any warning lights remain, check for any lingering issues or error codes.


How do you clear the ACM code on a 1997 Cadillac Seville?

To clear the ACM (Accessory Control Module) code on a 1997 Cadillac Seville, you can use a diagnostic scan tool to read and clear the codes from the vehicle's computer. Alternatively, you can disconnect the car's battery for about 15 minutes, which will reset the system and clear the codes. However, ensure to check for any underlying issues before clearing the codes, as they may reappear if the problem isn't resolved. Always consult the vehicle's service manual for specific instructions related to your model.


Is it clear if this service is available for non-US citizens?

Yes, it is clear that this service is available for non-US citizens.


Why won't your 1995 Eldorado Cadillac take a jump start?

My vehical has been sitting in the garage it has a good running engine, but it has been rear ended. I decided too jump start it,it would not take a jump start. I notice that there was a wiring connect to the positive cable leading from, to a clear see through box, then it went to some wear I did not look to see. Why come my 1995 Eldorado Casdilac Wont take a full jump start. It will light up the interia lights and things like that but when I disconnect the cable it go dead completely. your battey might not be good.


How do you clear OBD codes on a 2004 Cadillac?

You need a OBD 2 scanner/reader to erase the codes