on the mk 1 avensis, if you lift the bonnet , the headlight and indicator frontlens separate
as modules. if you look at the top of the lights there are a couple of screws for the main
head light, but there is a screw that has a hole that is oval shaped, it also has a symbol
of a light and numbers 1.2% on my car you have to do is slide a flat blade screwdriver
through the oval hole, down the side of the screw, to push a plastic clip. if you look in side
you can see a bit of a groove. at the same time you pull the indicator lens forward
How to change bulb behind switch of fan Toyota Avenses
changing rear light bulbs on toyota avenis
To replace the headlamp bulb on a 2003 Toyota Avensis, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the back of the headlamp assembly; you may need to remove a cover or clip. Disconnect the electrical connector from the old bulb, then twist and remove the bulb from the socket. Insert the new bulb, reconnect the electrical connector, and replace any covers or clips before testing the new bulb.
http://wiki.answers.com/Q/How_do_you_replace_the_offside_headlight_bulb_located_on_a_2004_Toyota_avensis"
To change the passenger side front headlight on a 2007 Toyota Avensis, first, open the hood and locate the headlight assembly. Remove the plastic cover by unscrewing any clips or screws, then disconnect the electrical connector from the headlight bulb. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble by reversing the steps. Ensure everything is secured properly before closing the hood.
Yes there is a separate bulb.
To replace the light bulb for the gear shift indicator in a 1994 Toyota Camry, first, disconnect the negative battery terminal to ensure safety. Remove the center console cover by unscrewing any screws and gently prying it up to access the gear shift area. Locate the bulb socket for the gear shift indicator, twist it counterclockwise to remove it, and replace the old bulb with a new one. Reassemble the console and reconnect the battery terminal to complete the process.
if this is the one on the bumper, you can access it from the bottom of the bumper. turn it as if you are loosening it. it should come out. if this is the one inside the cluster panel, remove the cluster and see which bulb it is. you should find this bulb at a parts store or a Toyota dealership.
To replace the light bulb on the automatic gear shift indicator of a 2003 Toyota RAV4, first, ensure the vehicle is turned off and the key is removed. Carefully remove the center console cover around the gear shift by prying it up gently with a trim tool or screwdriver, taking care not to damage the clips. Locate the bulb socket for the gear shift indicator, twist it counterclockwise to remove, and replace the old bulb with a new one. Finally, reassemble the console by snapping it back into place.
Pull away the black plastic cladding in the back rear corner of the trunk that covers the rear light housing, the turn indicator bulb is the bulb closet to the side of the car, turn and pull the socket and bulb out of the housing, turn and remove the bulb to remove from socket.
To change an indicator light on a Toyota Yaris, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the light assembly where the indicator is housed. Depending on the model year, you may need to twist the bulb socket counterclockwise to remove it, then pull out the old bulb and replace it with a new one. Finally, reinsert the socket, test the light, and close the hood.
Put a flat head screwdriver behind the indicator cluster and prize it out. Then just twist out the bulb.