Once vehicle is supported on jack stand and wheel is off:
1: look at base of lug nut studs and see if there is a clip against the drum. If there is a clip, pry off with screw driver and discard. If no clip don't worry it was removed or fell off already.
2: Grab drum with both hands and pull evenly (slight back and forth or rocking motion may be used) on the drum. Hand positions 3 and 9 or 12 and 6. There is a small lip on back edge of drum to grab for extra grip but, Do Not pull on back plate. You can feel where drum stops and back plate begins but rotating drum slightly, since, the back plate will not move like the drum.
Drum should slide off wheel studs easily. Do Not use any oil on any of these parts you can damage the brakes and lug nuts might not stay tight once finished.
To remove the rear brake drum on a 2002 Pontiac Grand Am, first ensure the vehicle is safely lifted and secured on jack stands. Remove the wheel and tire, then locate the drum's retaining screws, if present, and remove them. Use a brake drum puller if necessary to avoid damaging the drum, then gently pull the drum off the wheel hub. If the drum is stuck, you may need to adjust the brake shoes inward by accessing the adjuster through the inspection hole on the backing plate.
To remove the rear brake drum from a 2002 Mitsubishi Lancer, start by loosening the lug nuts on the rear wheel and then lift the vehicle and secure it with jack stands. Remove the wheel, then locate the brake drum. If the drum is stuck, tap around the edge with a hammer to loosen it. Finally, pull the drum straight off the hub, ensuring any retaining clips or hardware are removed beforehand.
how do remove the brake drum on a 1991 mazda 323
You can remove the front brake drum, on your Kawasaki Mule 2500, by removing the wheel and axle. The brake drum will slide off.
How do you remove rear brake drum from a 1993 Toyota pickup?
how do you remove rear brake drum on a suzuki 2004 xl7
If you're trying to remove the brake drum, be sure to NOT have the emergancy brake on. Remove the wheel and tap the drum with a rubber mallet until it releases, That's it!
To remove a rear brake drum on a Chrysler, first ensure the vehicle is safely elevated and secured on jack stands. Remove the wheel, then locate and remove any retaining screws or clips securing the drum. If the drum is stuck, gently tap it with a hammer or use a brake drum puller to loosen it. Once free, slide the drum off the hub to access the brake components.
To replace the rear parking brake shoes on a 2002 Buick Rendezvous, start by lifting the vehicle and removing the rear wheels. Next, remove the brake drum by taking off the retaining screws, if applicable, and sliding the drum off the hub. Disconnect the parking brake cable and remove the old shoes, noting their arrangement. Install the new shoes in the same configuration, reattach the parking brake cable, and reassemble the drum and wheels before lowering the vehicle.
Better hope it is not a drum brake- it was originally equipped with a disc brake caliper.
Need to know if the vehicle has rear disc brakes or drum brakes and which part of the e-brake system you want to remove, front cable, rear cables, e-brake linings, etc.
how to remove rear brake drum on 1994 cavalier