To remove the spanner symbol from the dashboard of a Mitsubishi Outlander, first ensure that the vehicle is in the "ON" or "RUN" position without starting the engine. Then, press the trip reset button on the instrument cluster until the spanner light blinks, and hold it until it turns off. If the light remains on, it may indicate that maintenance is still due, so check the vehicle's service requirements. If you're unsure, consult the owner's manual or a professional mechanic for assistance.
Press and hold the 'UP' arrow on the speed set control and move the ignition key from 'Lock' to the 'On' position.
Spanner dose mean dash board help on laska.
remove the screws. make sure you don
Look under the panel where the dashlights are, there should be 2 screws.
You can remove the dashboard from a Mitsubishi Triton by removing the retaining clips. There are 6 retaining clips. Two clips on each and of the dashboard and two clips in the middle.
needs a service
Turn the key to position 2 then hold down the brake and accelerator pedal for 15 seconds, it will then flash remove key job done!
Requires service
the dash just removes without having to untighten any screws
what the dash lights mean on a mitsubishi canter 35 3 litre
it is due for a service.
under the passenger dash. You have to remove the glove box and lower trim to get to it.