answersLogoWhite

0

To remove the front CV joint on a Hyundai Santa Fe, first, lift the vehicle and secure it on jack stands. Remove the wheel, brake caliper, and rotor to access the axle. Then, use a socket to remove the axle nut and disconnect the lower control arm or strut, if necessary. Finally, slide the CV axle out of the hub and the transmission, taking care to avoid damaging any seals.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Related Questions

How do you remove rear CV joint on Hyundai Santa Fe?

witha hammer just tap it and it will come off but not too hard othereise it will crack


Hyundai excel replace cv joints?

To replace the CV joints on a Hyundai Excel, you'll need to lift the vehicle and remove the wheel. Then, take off the brake components and disconnect the axle from the hub. After that, remove the retaining clips and pull the CV joint off the axle. Finally, install the new CV joint, reassemble the components, and ensure everything is tightened properly.


Is it cv joint or cvc joint?

CV (Constant-Velocity) joint


How do you remove cv joint from a 2004 sonata?

To remove the CV joint from a 2004 Hyundai Sonata, first, lift the vehicle and securely support it on jack stands. Then, remove the wheel and brake components to access the CV joint. Next, disconnect the axle from the hub by removing the axle nut and any retaining clips, and then use a slide hammer or a pry bar to gently pull the CV joint from the transmission. Be sure to replace any seals and inspect for wear before reassembly.


How do you fit a cv joint on a ford galaxy?

how to fit cv joint on ford galaxy


What is the joint on the front propshaft is it a cv or a uj?

If it is round, it is a cv. If it is a cross shape, it is an u joint.


What happens when cv joint breaks when you are driving?

what happens when cv joint breaks when you are driving on freeway


What is a CV joint in Norwegian?

CV Skjøt


Are there 4 cv joints on a Camry?

Yes you have two drive axles that use 2 CV joints, both have an inner CV joint and an Outer CV joint


How do you replace a CV joint in Kia Sportage 2000?

The CV joint in a 2000 Kia Sportage can be replace by roving the tires, axle nuts, and the knuckle bolts on the struts. Next, the CV joint can be removed by placing a screwdriver between the transmission and the CV joint will pop out.


What does it mean that a cv joint bellows?

The bellows on a CV joint is the rubber boot that covers the joint keeping dirt and water out, grease in.


What is a CV and when should you use a CV instead?

CV joint is a Constant Velocity Joint in all FWD cars and most 4WD cars. A cv joint makes your FWD car drive and turn without losing velocity.