To reset the factory Sirius radio in a Kia Forte, first, turn on the vehicle and the radio. Then, press the "Menu" button, navigate to the "Settings" option, and select "Factory Reset." Follow the on-screen prompts to confirm the reset. Once completed, the radio will revert to its original settings, and you'll need to re-enter any Sirius account information if applicable.
To reset Sirius radio in a Jeep, start by turning on the vehicle and the radio. Then, press the "Menu" button and navigate to the "Settings" or "System" option. Look for a "Reset" or "Factory Reset" option and select it. After the reset, you may need to re-establish your Sirius subscription if required.
A Hard Reset on a Factory installed Sirius Radio is basically, Disconnecting the battery and reconnecting / should be able to get audio on 184/ then send another Activations signal
In a effort to block channel with explicit language on Sirius (XL on their channel guide), I was able to reset the Sirius PIN in my 2012 Ford Fusion while in the Sirius radio function. While in the radio function, choose Menu and press OK to access the Sattelite Radio Menu. In there, go to Channel Lockout Menu and press OK. In this sub-menu, you will find Reset PIN and if you have not changed from the default, the option to change the PIN to a custom PIN. Please note the factory default PIN for my particular vehicle was "1234". Many of the posts that I have read suggest the default PIN is "0000". That was not the case for my vehicle.
The factory radio does not have a reset button.
To reset a Ford Sony CD Generation 2 radio to factory settings, turn on the radio and press the "Menu" button. Use the tuning knob or seek buttons to navigate to the "Settings" option, then select "Reset" or "Factory Reset." Confirm the reset by pressing the appropriate button, usually "OK" or "Enter." Your radio should now revert to its original factory settings.
Factory reset for a radio in a 1999 Honda Accord can be done by a dealership. The requirements from the dealership to have this done is proof of vehicle ownership.
Radio codes are set at the factory and cannot be reset. If you lost the code go to your dealer and have them look it up.
To perform a factory reset on the XM radio in a 2017 Jeep, you will need to access the radio settings menu. This can usually be done by pressing the "Menu" button on the radio interface. Within the settings menu, look for an option related to resetting or restoring factory settings. Follow the on-screen prompts to confirm the reset, which will erase all saved settings and return the radio to its original state.
To reset the radio on a 1995 Toyota Avalon, start by turning off the car and then disconnecting the negative battery terminal for about 15 minutes. This will reset the radio and clear any stored settings. After reconnecting the battery, turn on the radio, and it should be reset to its factory settings. You may need to reprogram your favorite stations afterward.
To reset a 1999 Accent radio, locate the reset button, which is often a small pinhole on the front or side of the unit. Use a paperclip or a similar tool to press and hold the button for a few seconds. If your radio does not have a reset button, you can try disconnecting the car battery for a few minutes and then reconnecting it. This should restore the radio to its factory settings.
Depending on the type of unit (Starmate, Sporster etc) Hard reset means pressing MENU, then going to the SIRIUS ID and display it. Then pressing DISPLAY and then MEMO and then BAND. It might take 2-3 tries, but that resets the lock code and the entire unit.
To reset the radio in a 2004 Toyota Echo, you can try disconnecting the car battery. Remove the negative terminal for about 10-15 minutes, then reconnect it. If your radio has a reset button, you can also look for a small pinhole button on the front of the unit and press it with a pointed object. This should restore the radio to its factory settings.