The average cost for the part to replace the rear bumper cover on an Oldsmobile Intrigue varies between $88.00 and $124.00, depending on the year. The labor cost to replace the rear bumper will vary between $75.00 and $150.00 depending on the repair shop.
If you do it yourself, the VC gaskets are $53.00 bucks at Autozone, and it will take you all day. If you take it to the stealership, they will charge you twice that in parts and about 3 hours of shop labor. So you will probably plop down something just shy of $500.00.
With your hands
The fuse panel cover is on the passenger side in a 1998 Oldsmobile intrigue. Same location as vehicles that have it on driver side. Just pull on it and it will pop off.
In front of the Plenum cover connected to the throttle body
There are many gaskets on any car engine. If you are asking about head gaskets, they are between the cylinder head(s) and the engine block. The cylinder head is under the valve cover. --------------
The cost to replace valve cover gaskets on a 2001 Subaru Legacy is about $600. If the work is done at home the cost is only $100 to $200.
I'm going to replace the valve cover gaskets on my 5.4. The top bolts their very loose, but hesitant to come out. any thing would help me
To replace the blower motor in a 1998 Oldsmobile Intrigue, first disconnect the negative battery cable to ensure safety. Then, remove the passenger side lower dash panel and the blower motor cover. Disconnect the electrical connector from the old blower motor, unscrew it from its housing, and then install the new blower motor by reversing the process. Finally, reattach the dash panel and reconnect the battery.
The windshield wiper fuse for a 1999 Oldsmobile Intrigue is located in the fuse box under the dashboard on the driver's side. To access it, remove the cover and look for the fuse labeled "Wipers" or "Wiper Motor." If you need to replace it, ensure you use the correct amperage. Always consult the owner's manual for specific fuse ratings and locations.
cadillac catera replace valve cover gasket 1997
Do you still need some assistance?