The engine with the stamped numbers 10L124684 and V0918CNN is a General Motors V8 engine, specifically from the Chevrolet family. The "V" indicates it was produced in a GM plant in Flint, Michigan, and the "0918" suggests it was manufactured on September 18. The "10L" prefix indicates it is a 5.7L (350 cubic inch) engine, commonly used in various Chevrolet vehicles during the 1980s and 1990s.
The numbers stamped in front of the head are the engine id numbers.
On a 1970 Road Runner, the engine's stamped numbers are typically found on the driver's side of the engine block, just above the oil pan rail, and often near the engine mount. The transmission numbers can usually be found on the driver's side of the transmission case, often near the rear. These stamped numbers include vital information such as the engine block's production date and the transmission's build date, which are essential for verifying authenticity. Additionally, the VIN may also be stamped on the engine for identification purposes.
if they are the no.'s on a pad in front of the left head, they are the engine no.
Engine numbers on a slant 6 are stamped on the top of the block that protrudes from under the head below #1 spark plug.
there should be a numbered stamped on the rear of the engine
on the front of the engine to the right as you look at it. The engine block protrudes out past the head and on the top of this protrusion is stamped engine code and number. on the front of the engine to the right as you look at it. The engine block protrudes out past the head and on the top of this protrusion is stamped engine code and number.
look at the number on the frame, it is either stamped into the side close to the engine, or it is on the frame under the handlebars If the engine was replaced as mine was then the numbers on the frame will not tell you if you have a later or earlier model engine.
The engine number (the last eight numbers of the vehicle identification number) is stamped on the engine block, transmission and frame.
On a 99 Kia Carnival, the engine numbers are usually stamped right on the left side of the engine. Make sure you record down all the numbers for the engine number in order to find whatever it is you're looking for regarding the engine.
The stamped engine number on a Briggs and Stratton 10hp OHV engine is typically located on the engine's side, near the air cleaner or on the engine block itself. You may also find it on a metal tag attached to the engine. Look for a series of numbers and letters that indicate the model, type, and code date. Always ensure the engine is clean for easier visibility of the stamped number.
The engine with the numbers C40E-6015F stamped behind the starter is a Ford 289 cubic inch V8 engine. The "C" in the code indicates that it was produced in the 1960s, specifically in 1964. The "40" denotes the model year, and "6015" signifies it as an engine block. This engine was commonly used in various Ford vehicles during that era, including the Mustang.
The GM engine with the casting number 3970010 is a 350 cubic inch V8 engine, commonly found in various Chevrolet vehicles from the late 1960s to the early 1980s. The stamped numbers "K1114TXL" indicate that the engine was manufactured on November 14, likely in the year 1979, with "TXL" designating it as a specific engine variant. This engine was often used in passenger cars and light trucks.