The torque setting for a Fiat Ducato front driveshaft hub nut typically ranges between 200 to 250 Nm (Newton-meters). It's essential to consult the specific service manual for your model year, as specifications may vary slightly. Always ensure to use a calibrated torque wrench for accurate measurements during installation.
The front hub nut on a 2004 Fiat Panda typically requires a torque setting of around 200 Nm (147 lb-ft). It's important to use a torque wrench to ensure the correct specification is met for proper wheel assembly and safety. Always consult the vehicle’s service manual for the most accurate and specific torque settings. Additionally, it's advisable to recheck the torque after a short period of driving.
front hub 120nm i think
The torque setting for the front hub nut on a Polaris Sportsman is typically around 30 to 40 foot-pounds, but it's important to consult the specific owner's manual for your model year to confirm the exact specification. Proper torque ensures that the hub is securely fastened, which is crucial for safe operation. Always use a torque wrench to achieve the correct setting.
90 to 100 lbs
170 pounds
See the link here:
citroen saxo 1.4. what is the rear brake hub torque setting?
Actually the nut does not hold the rotor on. Your brake caliper does that. The nut holds the front hub on. correct and the torque setting for the front hub nut is ..284 ft pounds
Rear wheel bearing nut tork setting
Mk1 Focus Euro spec (not US), rear hub nut, the big one in the middle, 29mm socket, torque to 235Nm
The torque settings for the rear hub nut (in the Haynes manual) is 175Nm or 127lb ft.