0
What else can I help you with?
Where is the knock sensor located on a 95 oldsmobile 98 with a 3800 engine?
The knock sensor is located on the 95 oldsmobile 98 with a 3800 engine under the midpoint of the heads.
Where is the oxygen sensor on a 1990 Buick Le Sabre 3800?
The 1990 Buick LeSabre oxygen sensor is located on the outside of the air cleaner housing. The oxygen sensor will be on the back side of the housing.
Location of a cam sensor on a 1989 Oldsmobile delta 98 3800 v6?
The camshaft position sensor is located behind the water pump pulley. If looking directly at the pulley, it is at about the 10 O'clock position. TechJK ---------------------
Where is the Gm 3800 series 3 crank position sensor located?
Undecided QuestionShow me another » Where is the camshaft position sensor located on a 1997 pontiac with a 3800 motor
Where is the knock sensor on a 1992 Buick Regal 3800?
Where is the knock sensor located on a 1992 buick regal
Crank Position Sensor on 1990 3800?
behind the harmonic balancer pully on thr right side of the engine
Will a 1989 Oldsmobile 98 3800 fit in 1993 Pontiac Bonniville SE 3800?
Yes
Where is the coolant temperature sensor located in a Pontiac firebird 2002?
on the 3800 V6 its below the throttle body
Can a 1992 Oldsmobile Eighty Eight 3800 engine work in a 1996 Oldsmobile Eighty Eight?
No.
Where is MAP sensor on 97 firebird 3800 v-6?
The Manifold Absolute Pressure (MAP) sensor is located near the throttle body on the intake manifold.
Where is the coolant temperature sensor which talks to the ECM on an Olds 88?
located at the drive belt end of the motor (3.0 and 3.8 engines} 3800 motors the sensor is located at the other end. A 3.8 and a 3800 are the same engine just as a 3.1 is the same as a 3100. I have never heard of a 3.0 GM engine.
Where is the PCV valve located on a 1998 Olds Intrigue?
The PCV valve on a 1998 Oldsmobile Intrigue is located under the MAP sensor. If you remove the large plastic cover with 3800 written on it and look to the left side of the engine there is a sensor marked (Pressure Sensor) with 3 wires going into it. Unplug that sensor and turn it counter clockwise and lift it off and you will see the PCV valve under it. Here is a picture to go along with my answer. http://autorepair.about.com/library/illustrations/bl795lib.htm
