When replacing brake pads a diagram may be needed. Diagrams to remove brake pads can be found in Chevy forums and in the specified auto books found in auto stores.
you say alot of prayers!
To remove the rear brake rotor from a Chevy Blazer, start by lifting the vehicle and securing it on jack stands. Remove the wheel and tire, then detach the brake caliper by unbolting it and hanging it securely to avoid stress on the brake line. Next, remove the caliper bracket if necessary, and then pull off the rotor. If the rotor is stuck, gently tap it with a hammer to loosen it, ensuring to avoid damaging other components.
On a 1998 Chevy Blazer, the parking brake switch is located on the top of the parking brake assembly. There are 3 bolts that hold the switch to the parking brake assembly.
Remove the wiring harness from the high mount brake light. Remove the retaining screws. Reverse the process to install the new high mount brake light.
where can i find a diagram for a 1997 chevy s10 brake switch?
That's what I am asking you. How do you replace a parking brake handle on an S-10 1996 Chevy Blazer?
Directly above the brake pedal.
Lift the wheel in Question. Remove the tire. Remove the disc brake assembly. pull the rotor off. replace in reverse order.
remove the wheel,remove the brake caliper assy,remove the dust cap in the center of the axle.remove the cotter pin.remove the nut.then pull the hub off
need help installing brake shoes need diagram
you can find the switch on the back of the brake pedal.
you most likely need to change them