0
What else can I help you with?
Why does engine light stay on when checking obd codes?
The engine light will not go off tell you fixed the cause of the engine light and erased the code that set it off.
How do you find what the OBD-II codes for a 1996 Chevrolet beretta?
WWW.Berettastuff.Com they will answer any question you have about codes.
Will as obd II Read obd I codes?
No, it will not.
How do you clear OBD codes on a 2004 Cadillac?
You need a OBD 2 scanner/reader to erase the codes
How do you find OBD codes 98 Camry?
You can purchase a Toyota repair manual or ask us!
What is importance of Diagnostic trouble codes in automobile OBD-II systems?
to find out who messed it up0-
Need all codes to pass obd?
Yes you need all OBD codes clear to pass testing
Will unhooking the battery after replacing an ignition coil on a 1999 Toyota Sienna reset the check engine light?
Since all cars after '96 have OBD 11 it takes a scanner to remove the trouble codes. Auto Zone will do it for free. it does have obdII but the codes will be erased by unhooking the battery.
How do you retrieve obd codes on Volvo v70xc awd 2000?
You need an OBD scanner or take it to your local Auto Parts store. Stores like Advance auto parts can usually read codes for you. The generic codes they read out can be converted to Volvo's OBD codes. The generic codes usually start with the letter P.
Where can you find a list of engine codes for a 1986 Oldsmobile Delta Ninety-Eight?
go to OBD codes.com they have them for everything sandi
How do you read obd on 91 Honda Prelude?
There is no obd port. You can peel back the carpet under the passenger foot area and reveal the ecu. From there you can read the led flashes to find out what codes are being displayed.
How do you get obd codes for a Daewoo Nubria 1999 model?
To retrieve OBD codes from a 1999 Daewoo Nubira, you will need an OBD-II scanner, as this model is equipped with an OBD-II system. Connect the scanner to the OBD-II port, which is typically located under the dashboard near the driver's seat. Turn on the ignition without starting the engine, and follow the scanner's instructions to read the error codes. Make sure to note any codes displayed for further diagnostics or troubleshooting.
