For a 1977 Chevrolet Nova Concours sedan, the typical wheel alignment specs are approximately as follows: front camber should be set to -0.5 to -1.0 degrees, front caster to 2.0 to 4.0 degrees, and toe-in should be about 1/16 inch to 1/8 inch. The rear alignment usually requires a slight toe-in of about 1/16 inch. However, always refer to the specific service manual or consult a professional for precise adjustments tailored to your vehicle.
I Use 1/2 inch of toe in
alignment specs are the same unless changing ride height. putting bigger wheels will not alter alignment
what are the wheel alignment specs for 1998 ford explorer
The alignment specs for a 1966 Chevrolet C10 typically include a front camber of -0.5 to -1.5 degrees, a caster of 2.5 to 4.5 degrees, and a toe of 1/16 to 1/8 inch. It's important to check the specific requirements based on the vehicle's modifications, as changes in suspension or tire size can affect alignment settings. Always refer to the manufacturer's service manual for the most accurate specifications. Proper alignment helps ensure optimal handling and tire wear.
According to AllData, the toe alignment specs are 0.03 degrees +- 0.25 degrees, which essentially means zero degrees (no toe-in or toe-out).
GO TO WWW.AUTOZONE.COM AND LOOK FOR THE SPECS. LINK
The wheel alignment specs should compensate for crown in the road. The settings should be 2.54/2.73 for the caster and +.21/-.04 for the camber. The toe should be 1/16".
You will have to find a repair book maybe from the library for that answer.
get a chiltons repair manual from the library for your car.
Yes
30 ft /lbs
40-60