0
Basra is both a state capital and a state of Iraq. The largest field in the state is the Rumaila field, a huge field as documented in the second reference.
Not only is there variation of properties from field to field, but also well to well within the same field. Therefore, the oil is divided into Basra light, medium and heavy. A Basra blend is about 31.5 degrees API. The sulfur content is 1.95%. I couldn't find more specifications on the internet.
Variations will also occur over time, as the less desirable heavy crude is usually produced later in the life of the fields.
See related links.
What else can I help you with?
What is the difference between astm 105n and astm a350-lf2?
ASTM A105 - For ambient- and higher-temperature service in pressure systems. ASTM A350 - intended primarily for low-temperature service and requiring notch toughness testing.
Reid vapor pressure of water?
Depends on temperature. For ASTM D323 the RVP of water is ~49.5 mmHg (torr) gauge or ~809 mmHg absolute (assuming standard pressure). FYI - ASTM D323 is measured at 100F.
Is astm material p91 martensitic steel or austenitic steel?
P 91 is a martensitic steel.
What is ASTM distillation?
This is one of the testing methods for gasoline and is also called Engler distillation. The whole method is based on the determination of boiling point by performing batch distillation. Boiling point is important for the safety and performance of solvents and fuels. It gives the composition, properties and behavior of fuel. Carrying out batch distillation also determines the volatility which majorly shows the tendency of hydrocarbons to produce explosive vapours. This also tells us the application in different industries depending upon the various temperature behavior of the fuel. Boiling point according to the standards limits distillation based on the product specification.
What is Hardgrove grindability index?
The Hardgrove Grindability Index was developed in the 1930s from experimental work by R. Hardgrove to determine the relative difficulty of reducing various coals to a particle size required for efficient combustion in pulverized coal boiler furnaces. The HGI is now commonly applied to specifications for coal to be used in the iron making, cement and chemical processes. There are several different "standard" methods for the determination of HGI (e.g. - AS1038 Part 20:2002, and ASTM D409-2006), which can lead to significantly different results. Further, HGI is an empirical measure and not a physical proprty of coal; as such the results of any standard test have relatively low repeatability for a given coal sample. In general, the higher the HGI value, the more readily a coal can be reduced to smaller particle sizes.
What test is used to evaluate fracture resistance of materials subjected to impact loads?
Using the (ASTM E 23) formal specification of impact - strength limits standards for Metals Impact testing is performed by using both the Charpy and Izod testers, both of these use the good old fashioned swinging pendulum method. For Cast Irons the (ASTM A327) specification are used. For electrical insulating parts and plastics the (ASTM D256) specifications can be used. For Tool steels the Torsion -Impact test method is employed. Using the Hatt-Turner tester with the (ASTM D143) specifications for different kinds of woods. For the American Railway Engineering System for the Axles used on trains the repeated drop tests are required to follow the (ASTM D143) specifications.
What is inclusion rating and its method?
Inclusion rating is a measurement of Impurity in any steel / alloy elements.. one of the STD for method of evaluation is ASTM E45.. MSQ Inclusion Rating is designed to produce ASTM E45 Method A and Method D inclusion ratings for inclusion types A, B, C and D. The details of the standard are found in the ASTM Annual Book of Standards, Volume 03.01
What ASTM coves the sampling of aggregates?
ASTM D75 is the ASTM that covers the sampling of aggregates.
Is astm a105 is equivalent to astm 304?
no
What is the ASTM equivalent of DIN 1543?
The ASTM equivalent of DIN 1543 is ASTM A572. Both of these materials are a type of carbon steel.
Specification of transformer oil of 33kv grade?
There are different specifications. Is this new oil or used oil? What type of oil is it? There are at least 3 classes of insulating liquids. I will assume that this is for new Mineral Oil such as Diala-A. Here are the minimum requirements from NETA ATS 2007: Dielectric Breakdown (ASTM D877) = 30 kv Interfacial Tension (ASTM D971) = 38 minimum Neutralization Number (ASTM D974) = 0.015 maximum Water Content (ASTM D1533) = 20 ppm maximum Power Factor @ 25C (ASTM D924) = 0.05% maximum Power Factor @ 100C (ASTM D924) = 0.40% maximum Color (ASTM D1500) = 1.0 Again if it is a different class of insulating fluid there will be additional and/or different limits.
What is nuclear-uranium and plutonium?
If you think to nuclear grade: uranium and plutonium very pure, the maximal values for impurities being limited by specifications as ASTM in USA, etc.
What is the difference between ASTM B187 and ASTM B152 copper?
ASTM B187 and ASTM B152 copper are very similar in structure. The main difference is that ASTM B187 copper is temper H04 and is hard, and ASTM B152 copper is cold rolled and hot rolled.
What is the astm equivalent of bs 1449 grade hs 14?
The ASTM equivalent of BS 1449 Grade HS 14 is typically ASTM A572 Grade 50. Both specifications refer to high-strength structural steel, with ASTM A572 Grade 50 offering similar mechanical properties and yield strength. However, it's essential to verify specific requirements, as there may be variations in chemical composition and other properties. Always consult the latest standards for precise comparisons.
Is specification of erw pipe?
ERW (Electric Resistance Welded) pipe specifications typically include details such as the pipe's diameter, wall thickness, material composition, and applicable standards (e.g., ASTM, API). Common specifications for ERW pipes include ASTM A53, ASTM A500, and API 5L, which define the mechanical properties, dimensions, and testing requirements. Additionally, the manufacturing process involves the use of high-frequency welding to join the edges of the steel strip, resulting in a strong and uniform product suitable for various applications, including structural and fluid transport.
What is the ASTM equivalent of IS 2062?
Astm a36. Its rot rolled steel with nearly matching with astm a36.
What is the ASTM equivalent of St 50?
Astm 50
