To prepare 0.5 mL of 2N NaOH, you would need to dilute a higher concentration of NaOH solution. Assuming you have a 4N NaOH solution, you would mix 0.25 mL of the 4N solution with 0.25 mL of water to obtain 0.5 mL of 2N NaOH. Be cautious when handling concentrated NaOH solutions, as they are caustic and can cause skin irritation.
To make a 2N NaOH solution, you need to dissolve 80g of NaOH pellets (sodium hydroxide) in enough water to make 1 liter of solution. This will yield a solution with a concentration of 2N (normality), as the equivalent weight of NaOH is 40 g/mol. Be sure to wear appropriate protective gear and handle NaOH with care, as it is a caustic and potentially hazardous chemical.
To prepare a 2N solution of NaOH in 10 ml of water, you would need to calculate the amount of NaOH needed based on its molecular weight. Once you have determined the amount needed, dissolve it in 10 ml of water to make the solution. Remember to handle NaOH with caution as it is corrosive.
To prepare 2N NaOH in 20 ml, first calculate the amount of NaOH needed using the formula: (Molarity x Volume) / Normality. In this case, it would be (2 x 20) / 1 = 40 grams of NaOH. Then, carefully weigh out 40 grams of NaOH and dissolve it in enough water to make a total volume of 20 ml. Make sure to wear appropriate safety gear like gloves and goggles when handling NaOH.
One Mole of Sodium Hydroxide NaOH= 40.00g/l =1N (8.0g NaOH in 100.0ml of water)= 2N NaOH or (80g of NaOH in 1L of water)= 2N NaOH
In order to make 0.02 N NaOH from 0.2 N NaOH, one needs to dilute it by 10 x (10 fold). Depending on the volume of 0.02 N NaOH needed, that will determine the volume of 0.2 N used. For example, to make 100 ml of 0.02 N NaOH, you would dilute 10 mls of 0.2 N to 100 ml. This is seen in the following calculation: (x ml)(0.2 N NaOH) = (100 ml) (0.02 N NaOH) and x = 10 ml
To make a 2N NaOH solution, you need to dissolve 80g of NaOH pellets (sodium hydroxide) in enough water to make 1 liter of solution. This will yield a solution with a concentration of 2N (normality), as the equivalent weight of NaOH is 40 g/mol. Be sure to wear appropriate protective gear and handle NaOH with care, as it is a caustic and potentially hazardous chemical.
To prepare a 2N solution of NaOH in 10 ml of water, you would need to calculate the amount of NaOH needed based on its molecular weight. Once you have determined the amount needed, dissolve it in 10 ml of water to make the solution. Remember to handle NaOH with caution as it is corrosive.
To prepare 2N NaOH in 20 ml, first calculate the amount of NaOH needed using the formula: (Molarity x Volume) / Normality. In this case, it would be (2 x 20) / 1 = 40 grams of NaOH. Then, carefully weigh out 40 grams of NaOH and dissolve it in enough water to make a total volume of 20 ml. Make sure to wear appropriate safety gear like gloves and goggles when handling NaOH.
One Mole of Sodium Hydroxide NaOH= 40.00g/l =1N (8.0g NaOH in 100.0ml of water)= 2N NaOH or (80g of NaOH in 1L of water)= 2N NaOH
0.005
.05 of a ml
In order to make 0.02 N NaOH from 0.2 N NaOH, one needs to dilute it by 10 x (10 fold). Depending on the volume of 0.02 N NaOH needed, that will determine the volume of 0.2 N used. For example, to make 100 ml of 0.02 N NaOH, you would dilute 10 mls of 0.2 N to 100 ml. This is seen in the following calculation: (x ml)(0.2 N NaOH) = (100 ml) (0.02 N NaOH) and x = 10 ml
Yes, you can make a 1N NaOH solution from a 0.1N NaOH solution by diluting it 10 times. For example, to make 1 liter of 1N NaOH solution, you would mix 100 ml of the 0.1N NaOH solution with 900 ml of water.
make n one
To make a 0.1M solution of NaOH, dissolve the appropriate amount of NaOH pellets in water to make a solution of the desired volume. For example, to make 1 liter of 0.1M NaOH solution, dissolve 4g of NaOH pellets in enough water to make 1 liter of solution. Remember to wear appropriate safety gear and handle NaOH with care due to its caustic nature.
To make a 10% NaOH solution, you would need 100 grams of NaOH per liter of water. So to make 1 liter, you would need 100 grams of NaOH.
To make a 12N NaOH solution, you need to dissolve 480 grams of NaOH solid in enough water to make 1 liter of solution. Make sure to wear appropriate protective gear and handle the concentrated solution with care as NaOH is a strong base that can cause burns.