A thermocouple is a device used to sense the flame of a pilot light. IF the pilot light is not burning, the thermocouple does not permit the main flow of gas to the gas logs. Thermocouples DO wear out, are relatively cheap, and are made to be replaced.
Had the gas man in and he changed the gas supply line from the shutoff valve to the log set from a one/quarter to a three/eighths diameter line. Then he adjusted the air mixture (it is a secured by a small screw and turns to restrict or increase air supply to the burner. In my case he increased the amount of air and that decreased the noise level.Try it first by playing with the air mixture. That might solve your problem without having to mess with increasing the size of the gas supply line. If you have to change the line don't forget to check for leaks by squirting some dish-washing liquid on the connections.
The chemical smell in a gas log fireplace could be due to dust and debris burning off when you first start using it after a period of inactivity. It could also be caused by the presence of soot or residue on the burner or logs. It's important to ensure proper ventilation and have the fireplace inspected to rule out any gas leaks or other safety concerns.
A way to make sure that your gas log fireplace is safe is to make sure the logs fit correctly in the fireplace. Keep the logs a safe distance from curtains and carpets. A glass cover keeps children and pets at a safe distance. Make sure that you have proper vents to release the heat.
the ash consists of the non-combustible components of the log, such as minerals and other inorganic materials. These components make up a smaller portion of the log's mass, leading to the reduction in mass when the log is burned. The lighter ash is left behind once the organic matter in the log is converted to gases and released into the atmosphere during the combustion process.
The gas orfice when operating creates a vacuum drawing combustion air into the burner. This is the reason that gas pressures vary between types. Natural gas appliances operate at a nominal 3.5" wc pressure, while LP appliances run 10-11" wc. Natural gas has about 1000 btu's per cubic foot, while LP gas has about 2500. As an example, if you were to reduce the manifold pressure of LPG, you would have an oxygen starved mixture that would not burn properly. lc
A gas log can be installed in a regular fireplace, or in a prefab, but it should be done by an installer familiar with the process. Burning any fuel, including gas, uses up air, and produces products of combustion. Done badly, it could be very dangerous.
First off you need to turn off the gas and cap the gas line. Next, remove the gas line and the vent pipes up in the chimney. After that, remove the insert or gas log and install damper doors. Then, put on a suitable door to the fireplace. Finally, put a basket in the fireplace to hold the wood.http://wiki.answers.com/How_do_you_convert_a_gas_fireplace_into_a_wood_burning_fireplace#ixzz17W5OFp8M
No. Insert the word "minus" in place of the word "plus", and you'll have a true statement.
The up keep of a gas log isn't too hard. The gas log could be cleaned with a soft bristle brush or duster to remove dust.For reference you an check out: www.fastfireplaces.com/gas-logs/gas-log-maintenance
log in before you insert game.
Log Splitter Direct sells a variety of different log splitters to meet many needs. Gas log splitters are provided along with electric log splitters. These tools should only be used by individuals who know what they are doing.
Often the most efficient way to do this is to buy an insert for your wood burning fireplace. There are many professional companies who can do this and ensure that the job is done correctly.
There are a lot of companies that sell parts for a gas log burner. If one wants to buy parts for a gas log burner one can go to the store where one originally bought the gas log burner. They usually sell separate parts too, and one will certainly get the right parts.
first off you need to turn off the gas then, cap the gas line then remove the gas line and the vent pipes up in the chimney, then remove the insert or gas log, then install damper doors, put on a suitable door to the fireplace, and put a basket in the fireplace to hold the wood The above paragraph assumes that the fireplace was originally a wood burning fireplace that was retrofit to accommodate a gas fireplace insert and in that circumstance the information is accurate. However, if the fireplace was originally designed as a gas appliance it cannot be converted to solid fuel ( wood ).
gas task force log splitter
Natural gas log
A log burner if it is gas, should be installed professionally by a plumber or contractor who could run the gas lines to the furnace. If it is a wooden log burner than home depot and lowes are good choices.