It boils at 212 & becomes steam.
When hot water is mixed with cold water, the overall temperature of the mixture will be between the initial temperatures of the hot and cold water. The hot water will transfer heat to the cold water, resulting in a gradual temperature equilibrium.
That depends on how hot the water is in the cup. Use the thermometer to measure it and see.
When hot metal is added into the water then the metal looses its energy into the water and this heat is gained by the water, so the temperature gets increases when hot metal added into it i.e final temperature is greater than initial temperature of water.
The tiny bubbles in the cold tap water are likely due to the release of dissolved gases, such as oxygen or carbon dioxide, as the water warms up to room temperature. Gases are more soluble in colder liquids than in warmer ones, so when the water temperature changes, the gases come out of solution and form bubbles.
A Jolly Rancher will dissolve faster in hot water compared to room temperature water. The higher temperature of the hot water increases the rate of the dissolving process, allowing the candy to break down more quickly.
it changes the temp. by the temperature outside,like if its cold out the water will be cold and if it's hot outside than the water will be hot
temperature of the hot water combined with that of its container is higher than the ambient temperature and when the surrounding air strikes the container, the temperature of the air increase and this increases the vapour state of the air. note, for water to form around the outside of the hot water glass, the temp of the water must be lower than the temp of the surrounding air (condensation).
A line graph would be suitable for recording the temperature of hot water in a pan over time. This type of graph can effectively show how the temperature changes at different time intervals.
the hot water temperature will not reduce due to atmosphere temperature.
The temperature of hot water is typically between 120 to 140 degrees Fahrenheit.
Water can be either hot or cold depending on the temperature. Water at room temperature is considered neither hot nor cold.
Water temperature tells you how cold or hot the water is. If the water is hot, the heat indicates the kinetic energy of the water.
A hot water regulator controls the temperature of water in a system by adjusting the flow of hot water to maintain a consistent temperature. It helps prevent water from becoming too hot or too cold, ensuring a comfortable and safe water temperature for various uses.
A thermometer is used to measure the temperature of hot water.
When a thermometer is quickly dipped in hot water, it won't do anything. If you leave the thermometer in the hot water, the temperature shown will read higher. The temperature shown will not exceed the temperature of the water.
The recommended temperature for hot water in your home is 120 degrees Fahrenheit.
When hot water is mixed with cold water, the overall temperature of the mixture will be between the initial temperatures of the hot and cold water. The hot water will transfer heat to the cold water, resulting in a gradual temperature equilibrium.