a beaker
denatured alchohol is best. You can find it at your local hardware store. Denatured alcohol is the right stuff but make sure it has a ethanol content of 80% or higher. At least that is what I would call it. I got some that was 50% and it wouldn't work at all. So if you are going to get some I would recommend 80% or higher and maybe 90% if you want to be sure.
To accurately measure 12.6 mL of liquid ethanol, it would be best to use a graduated cylinder or a syringe with a volume capacity of at least 15 mL. These instruments are designed to measure liquid volumes with higher precision compared to other common household measuring tools like cups or spoons.
Alcohol has a lower boiling point than water so you can boil it off. _________________ Alcohol burns, water does not, so you could set the mixture on fire. Of course, you would lose the alcohol that way....and actually,....you would eventually lose the water too, because it might evaporate due to the heat!
No, it is not advisable or legal to try to cheat a breathalyzer test. These devices are designed to accurately measure blood alcohol concentration and tampering with them can have serious consequences. It is always best to drink responsibly and not drive under the influence of alcohol.
The time it takes for your body to metabolize 6 beers can vary based on several factors such as your weight, metabolism, and tolerance to alcohol. On average, it can take around 6-8 hours for your body to process this amount of alcohol and for you to pass a breath test. It's always best to wait longer or use alternative transportation if you have been consuming alcohol.
Depending on how accurate you want to be you can use a variety of methods. Common methods include the following (with increasing level of accuracy) 1) graduated cylinder 2) volumetric pipette. 3) Calibrated micro-pipette (may require more than one transfer)
The label of your vinegar bottle might contain information on alcohol content, but the alcohol would be so negligible that it isn't usually necessary for the percentage to be displayed. Unless you have testing facilities, if you need to know the alcohol content the best way to discover this would be to contact the manufacturer or distributor.
Pounds
It depends which property you are measuring. For linear dimensions a tape measure would be best
The best way to store and dispense alcohol in a mixer bottle is to keep the bottle tightly sealed when not in use to prevent evaporation and contamination. When dispensing, pour the alcohol slowly to avoid spills and measure accurately for consistent mixing.
Measure the diameter of the rug, and match it to the floor for best style.
sugar dissolved in water would be the best form to make alcohol.
It depends on how much you had to drink. The body 'removes' alcohol at the rate of one unit per hour.One unit of alcohol is 10ml (1cl) by volume, or 8g by weight, of pure alcohol.For example: One unit of alcohol is about equal to:half a pint of ordinary strength beer, lager or cider (3-4% alcohol by volume), ora small pub measure (25ml) of spirits (40% alcohol by volume), ora standard pub measure (50ml) of fortified wine such as sherry or port (20% alcohol by volume).
ml
a tape measure
Meters or feet would be best, depending on where you live.
The best graph for minutes would probably be a line or bar graph to measure something over time. Your welcome!