Sounds like "Floor Area Ratio"
The Floor Area Ratio, or "FAR," is usually given as a percentage. For example: if you have a 3,000 square foot residence on 1/4 acre (10,890 square feet) the FAR is 3,000sf / 10,890sf = .275 or 27.5%.
yorkston construction is a capernetry business in far north Queensland Australia
Civil engineers design things. These might be roads, buildings, airports, tunnels, dams, bridges, or water supply and sewage systems. They must consider many factors in their designs, from the costs to making sure the structure will stay intact during bad weather. This is one of the oldest types of engineering.Many civil engineers manage people and projects. A civil engineer may oversee a construction site or be a city engineer. Others may work in design, construction, research, and teaching. There are many specialties within civil engineering, such as structural, construction, environment, and transportation.Civil engineers usually work in areas where there is lots of manufacturing and businesses. Often they work at construction sites. Sometimes they work in places that are far away from cities. Most engineers work at least 40 hours per week. Some are required to travel.
Here at the University of Minnesota (Minneapolis, USA) the Civil Engineering building has basements marked 1 through 7. 7 is a fully functioning floor with a public commons. I am posting this from there now. It is one of the deepest basements in our local area. But I am also looking for a so-called "underground skyscraper" but so far have not found any.
When a building in an earthquake leans over far enough the force of gravity starts to act on the portion offset from the initial position of the building pulling it down further. That extra pull is called a p-delta effect The P-delta effect also refers to the second order (i.e. non-linear) effect of forces on the structure. As a results of the displcement, the stiffness changes, which in turn changes the force to be different than the linear analysis. In a linear analysis, a stiffness matrix K can be defined such that d = K*f where f is the vector of forces and d is the vector of displacements. In a P-delta analysis, there are additional non-linear effects, whether based on iteration or an closed for m solution.
depends on the size and material of the beam and post!
The Building Construction Handbook has had come out in many editions. There have been nine editions published so far. The latest edition came out in 2009.
Construction pictures usually depict how far along a construction company is on a building site. Pictures could include things like the foundation of the buildings and the parking lot or structure.
Practical Joke
Floor Area Ratio
as far as i know it is rofl...which means Rolling On the Floor Laughing
In the fields of architecture and civil engineering, construction is a process that consists of the building or assembling of infrastructure. Far from being a single activity, large scale construction is a feat of human multitasking. Normally, the job is managed by a project manager, and supervised by a construction manager, design engineer, construction engineer or project architect.
The Alam organization is a company which is in the building and construction industry. They are primarily based in the Far East and Gulf region of the world.
Rafters in typical residential construction are usually spaced 16 or 24 inches apart. The spacing will depend on the design of the roof, the load the roof needs to support, and local building codes.
Far too many potential possibilities to list. See the link below.
As far as i know Boot is the full form. I believe it is derived from the word Bootstrap which means "use a simple process to start a more complicated process"
yorkston construction is a capernetry business in far north Queensland Australia
Concrete, building insulation, plaster, gypsum board, ceramic tiles, wood planks, carpet, paint, bricks and mortar are all materials you can find on a construction site depending on how far along the project is to completion.