0
How do you connect a linksys wireless router to a Verizon modem and computer?
Wiki User
∙ 12y ago
1. Make sure all devices are powered on. Modem should have Power light on.
2. Plug DSL phone line in from wall jack to modem. Modem should now have DSL light on (first with slow blink, then fast blink, then steady).
3. Plug Ethernet cable into modem, then into internet port (the one by itself) on the router. Modem should not have Ethernet light on, Router will have internet light on.
4. Type 192.168.1.1 in a browser window. User name is blank, password is admin.
5. Under internet connection type, change to PPPoE
6. Enter your Verizon user name and password. Make sure "Keep alive" is checked.
7. Save settings. You should be online.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Which combination is required to establish a connection to initially configure the Linksys WRT300N wireless access device?
Which combination is required to establish a connection to initially configure the Linksys WRT300N wireless access device? a computer configured in the same IP subnet as the WRT300N and a direct cable connection to it
How create a lan without internet connection?
First, don't install the software that comes with the router. This is very important. Simply power up the wireless router. Once powered up, search for the default name for the router in the list of wireless connections. For Linksys, the network is named Linksys by default. You can change this later. Once connected to the router, you will be assigned an IP address. From the cmd window (Windows->Run->CMD), enter ipconfig. You should see the IP address as 192.168.1.101 (at least this is what Linksys starts with. The gateway listed below is the address for your wireless router. To connect to the wireless router, you can now enter the "gateway" address as described above into a browser window. Keep in mind that if you change the name of the wireless network name, it will disconnect your laptop from the network. This is ok. Just find the new name in the available networks and reconnect. Other laptops can connect too. They will be assigned a new IP address after they connect. For some reason, tech support for Linksys believed that an Internet connection was needed for their wireless router. They are clueless. Follow these instructions and you'll have your wireless LAN up and running in no time.
Which method establishes an administrative connection for configuring the Linksys WRT300N wireless access point?
From a computer in the same IP subnet as the access point, enter the default IP address of the access point in a web browser.
Who are the biggest computer networking companies worldwide?
CIsco, IBM, Microsoft, HP, Dell, Intel, Verizon, EMC, Symantec and AT&T are listed as the ten largest and most powerful networking companies worldwide.
How do you connect between linksys without ethernet cable?
u could use a wirless reapeter, or an acess point
Connecting Linksys Wireless Router?
The Linksys Wireless Router is easy to connect. Here is how to configure linksys wireless router. First, note that the Linksys wireless routers are compatible with Windows 7, Vista, and Windows XP. The Linksys Wireless router package should contain full set up instructions and configuration model. Take the wireless router out of the box and place it in a clear area near the computer. Load the CD into the computer and follow the setup and configuration steps.
Where can one download driver updates for a Linksys wireless router?
One can download driver updates for a Linksys wireless router on the Linksys company website under the "Update" tab. Once on the "Update" page, enter wireless router number and connect it to Linksys to update it.
Do I need a linksys wireless card for my new computer if I'm connecting to a linksys router for wireless internet or can I buy any wireless card?
You can use any wireless card for your new computer. The linksys router uses the same standard for wireless internet as all the other routers. Any modern wireless card will do.
Linksys Wireless Router Setup Basics?
Share Internet access by using a wireless network (WLAN) on your home computer. Attach the wireless router to the modem using the instructions provided by your specific Linksys router model. Temporarily connect the computer to an open network port. Open Internet Explorer and type in the URL provided by the Linksys manufacturer to complete setup. Once you have properly setup your computer to a wireless network, you can begin sharing games, files, printers, and much more.
Where to buy Linksys wireless router software?
Linksys is the name of the manufacturer of wireless routers, the software is the computer program that allows the computer to run the router. Finally they are available at Best Buy or Newegg.
Give me the types of wireless linksys that we have?
i know we linksys wireless-A,wireless-B and wireless-G.
How do I set up a Linksys router?
There are numerous websites and videos that will provide detailed information on how to set up a Linksys wireless router. The following provides the information you requested: data.agaric.com/how-setup-Linksys-router-Verizon-Fios
To which part of the network does the wireless access point part of a Linksys integrated router connect?
internal
How do you connect a wireless router if you have no CD drive?
Routers do not need any CD in order to connect to it. If you mean that you do not have a driver for the wireless adapter you get it from the manufacture website (Netgear, Linksys and so on).
Is calling Linksys' tech support a hassle if I want some help on configuring my Linksys wireless router?
I have not heard anything good about the Linksys' technical support at all. Your best bet is probably to go to your local computer store and ask them to help you configuring your Linksys wireless router.
Linksys Wireless Router Setup Details?
If you recently purchased a new computer, you may need several Linksys wireless router setup details. Before you begin the setup process, you should read the manufacturer's setup guide. Your Linksys wireless router setup might enable you to follow an on-screen tutorial. Most Linksys wireless routers have LED lights that can confirm your connection status. You can contact the Linksys customer support division to obtain help with the installation of your wireless router.
What service does a Linksys BEFSR41 provide?
Linksys BEFSR41 is a router that provides wireless internet access. The router can connect various devices to a single broadband or DSL internet connection.
