As fixed-size cells via a fixed channel between two points
1.simple i/o: 2.programmed i/o: a) synchronous data transfer b) asynchronous data transfer c) interrupt driven data transfer 3.Direct memory access data transfer a) burst mode b) cycle stealing mode
There are multiple wires connecting each sub-unit and data is exchanged using a parallel transfer mode. This mode of operation results in minimal delays in transferring each word. • In parallel transmission, all the bits of data are transmitted simultaneously on separate communication lines. • In order to transmit n bits, n wires or lines are used.
I have this same question and don't know it, please answer.
The hosts return to a listen-before-transmit mode
UART Universal Asynchronous Receiver-Transmitter
Asynchronous transfer mode is a telecommunications concept that supports a complete range of traffic (voice, video and data). It was designed to unify telecommunications and computer networks.
DMA transfer mode
1.simple i/o: 2.programmed i/o: a) synchronous data transfer b) asynchronous data transfer c) interrupt driven data transfer 3.Direct memory access data transfer a) burst mode b) cycle stealing mode
A technology that uses fixed-length cells capable of transmitting data at high speeds
DMA
Transports data, video, and voice at the same time using high-speed cell-switching technology. Has a popular high speed of 622.08 Mbps that is frequently used over fiber-optic cabling.
i/o data transfer speed of time
Asynchronous Transfer Mode (ATM) is a standard switching technique designed to unify telecommunication and computer networks. It uses asynchronous time-division multiplexing, and it encodes data into small, fixed-sized cells. This differs from approaches such as the Internet Protocol or Ethernet that use variable sized packets or frames.
A technology that uses fixed-length cells capable of transmitting data at high speeds
its an USART(universal synchronous and asynchronous receiver and transmitter) used for serial data transfer
The hosts return to a listen-before-transmit mode.
I) Packet Switching II) Frame relay iii) Fiber Disturbed Data Interference (FDDI) iv) Asynchronous Transfer Mode (ATM) v) Switched Hub Technology vi) Synchronous Optical Network (SONET) T-carrier system