It is usually controlled thorough a regulator which regulates the steam. a bit like a throttle on a car.
It depends upon megawatt of turbine & design of blades.
BMCR is the boiler maximum continous rating .It is that the maximum temperature , steam flow or the pressure that is used to generate full load or the bolier can withstand.TMCR is the turbine maximum continous rating .It is that the maximum temperature , steam flow or the pressure that the turbine requires for generating full loadNOTE:BMCR WILL BE MORE COMPARED TO TMCR
Turbine Gas Temperature. see this page for more info incolor.inetnebr.com/iceman/pilot38.htm
Your name is gmod is the same as your steam name. By changing your steam name, you change your name in steam related games. However, bans are not name-specific. They are tied to the steam account, not necessarily the steam name.
No. True steam is transparent. The white puffs of vapor you see coming from a tea kettle are water vapor, not steam.
The main uses for packing steam in a turbine are to produce electricity and power. The steam creates pressure when in turn spins a turbine at very high rates of speed.
The extraction of steam can either be controlled or uncontrolled. In an uncontrolled extraction the pressure of the extracted steam will decrease with an increase in extraction flow from the turbine. In a controlled extraction the extraction pressure is kept constant as extraction flow is increased or decreased.
That is how fast the steam is actually moving in the turbine. For impulse turbines it is twice as fast as the turbine blades. In reaction turbines it is the same speed as the blades. Because the blades of a turbine cannot move faster than 4500 feet per second without self destructing as it overcomes the centripetal force of the turbine wheels, the steam turbine is designed such that no turbine will exceed more than ~1150 feet per second on its tip speed. Thus the steam velocity through the turbine will be less than ~1150 fps for a reaction turbine and less than ~2300 fps for an impulse turbine, or about ~1570 mph, more than twice the speed of sound.
When the steam turbine can not maintain its selected or designed speed.Type your answer here... Speed fluctuating from low to high speed continously.
Hhs, hige speed stele
The controlled nuclear reaction generates large amounts of heat. That heat boils water, which creates steam. The steam turns turbine blades, and the turbine generates electricity.
No.
In a reheat turbine the stean first enters high speed turbine so its temp and pressure reduces before entering low speed turbine so a reheater is used to reheat the cooled steam
controlled the speed engine
controlled the speed engine
in a steam turbine, it is the speed at which the turbine should not go above. some time they call it overspeed trip. because the turbine rotor and berings are not design for such high speed and is not capable to handle this huge cenerfugal forces. usually there is two type of trip system: Electronic and Mechanical. some Steam Turbins have both protaction system.
Why extractions are taken out from steam turbine.