0
What else can I help you with?
Why balancing line is providing in steam turbine?
for thrust balancing.
How much steam is required to produce 5 MW power in steam turbine?
How much steam is required to produce 5 MW power in steam turbine?In fully condensing turbine we will need 20 TPH steam required to generate for 5MW
Is jacking oil required when stopping steam turbines?
jacking oil is not required when stopping the steam turbine
What is the uses of packing steam in turbine?
The main uses for packing steam in a turbine are to produce electricity and power. The steam creates pressure when in turn spins a turbine at very high rates of speed.
What is steam velocity in turbine?
That is how fast the steam is actually moving in the turbine. For impulse turbines it is twice as fast as the turbine blades. In reaction turbines it is the same speed as the blades. Because the blades of a turbine cannot move faster than 4500 feet per second without self destructing as it overcomes the centripetal force of the turbine wheels, the steam turbine is designed such that no turbine will exceed more than ~1150 feet per second on its tip speed. Thus the steam velocity through the turbine will be less than ~1150 fps for a reaction turbine and less than ~2300 fps for an impulse turbine, or about ~1570 mph, more than twice the speed of sound.
What is hunting in steam turbines?
When the steam turbine can not maintain its selected or designed speed.Type your answer here... Speed fluctuating from low to high speed continously.
What material is used in steam turbine blades?
Hhs, hige speed stele
How is the steam turbine speed controlled?
It is usually controlled thorough a regulator which regulates the steam. a bit like a throttle on a car.
What is a boiler reheater?
In a reheat turbine the stean first enters high speed turbine so its temp and pressure reduces before entering low speed turbine so a reheater is used to reheat the cooled steam
Why extraction taken from steam turbine?
Why extractions are taken out from steam turbine.
What is tripping speed?
in a steam turbine, it is the speed at which the turbine should not go above. some time they call it overspeed trip. because the turbine rotor and berings are not design for such high speed and is not capable to handle this huge cenerfugal forces. usually there is two type of trip system: Electronic and Mechanical. some Steam Turbins have both protaction system.
What are reasons for over speed tripping of steam turbine genarator in a combined cycle power plant?
wHAT??
