0
What happens to the member ports of a VLAN when the VLAN is deleted?
Wiki User
∙ 11y ago
The ports cannot communicate with other ports and port light turn to amber ...
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What does VLAN stand for?
A VLAN is a virtual LAN. In technical terms, a VLAN is a broadcast domain created by switches. Normally, it is a router creating that broadcast domain. With VLANs, a switch can create the broadcast domain. This works by, you, the administrator, putting some switch ports in a VLAN other than 1, the default VLAN. All ports in a single VLAN are in a single broadcast domain. Because switches can talk to each other, some ports on switch A can be in VLAN 10 and other ports on switch B can be in VLAN 10. Broadcasts between these devices will not be seen on any other port in any other VLAN, other than 10. However, these devices can all communicate because they are on the same VLAN. Without additional configuration, they would not be able to communicate with any other devices, not in their VLAN.
What is the purpose of the switch command switch port access vlan 99?
the switchport access vlan 99 command is used to designate a specific VLAN for a switch port, allowing you to control how traffic on that port is treated and segregated from traffic on other ports and VLANs in the network. This is a fundamental configuration step in building and managing VLANs within a network infrastructure.
How are data frames identified and sent to the correct VLAN when exiting an Ethernet trunk?
Based on the VLAN tag.
What is true about vlan?
VLAN is a custom network which is created from one or more local area networks. It enables a group of devices available in multiple networks to be combined into one logical network. The result becomes a virtual LAN that is administered like a physical LAN. The full form of VLAN is defined as Virtual Local Area Network.
What VTP mode can only accept Vlan information and not change it?
Client
What is pvid?
A Port VLAN ID (pvid) is a default VLAN ID that is assigned to an access port to designate the virtual LAN segment to which this port is connected. The pvid places the port into the set of ports that are connected under the designated VLAN ID. Also, if a trunk port has not been configured with any VLAN memberships, the virtual switch's Port VLAN ID (pvid) becomes the default VLAN ID for the ports connection.
What are two characteristics of VLAN1 in a default switch configuration?
VLAN 1 is the management VLAN. All switch ports are members of VLAN1.
What does VLAN stand for?
A VLAN is a virtual LAN. In technical terms, a VLAN is a broadcast domain created by switches. Normally, it is a router creating that broadcast domain. With VLANs, a switch can create the broadcast domain. This works by, you, the administrator, putting some switch ports in a VLAN other than 1, the default VLAN. All ports in a single VLAN are in a single broadcast domain. Because switches can talk to each other, some ports on switch A can be in VLAN 10 and other ports on switch B can be in VLAN 10. Broadcasts between these devices will not be seen on any other port in any other VLAN, other than 10. However, these devices can all communicate because they are on the same VLAN. Without additional configuration, they would not be able to communicate with any other devices, not in their VLAN.
What do switches create when they group a number of ports into broadcast domain?
this would be called virtual local area connection or a vlan
When inter VLAN routing is used how are the switch ports that link to the router configured?
switch(config)#int type <no> switch(config-if)#switchport mode trunk switch(config-if)#switchport trunk allowed vlan all/vlan no switch(config-if)#exit switch(config)#exit switch#
What is the purpose of the switch command switch port access vlan 99?
the switchport access vlan 99 command is used to designate a specific VLAN for a switch port, allowing you to control how traffic on that port is treated and segregated from traffic on other ports and VLANs in the network. This is a fundamental configuration step in building and managing VLANs within a network infrastructure.
What is virtual in a VLAN?
VLAN stands for Virtual LAN. It is called as such because you are essentially creating "virtual" networks on the same physical piece of hardware. Imagine a network switch with 20 ports. You could assign the first 5 to VLAN1, the next to VLAN2, and so on. You would end up with 4 segregated networks, but on the same physical switch. The virtual in VLAN is referring to the fact that there is nothing phsically separating the ports on the switch, it is done "virtually".
What are two characteristics of normal range vlans?
-can contain ports used as trunks -identified by a VLAN ID between 1 and 1005
What are the advantages of switch?
Switch is faster than HUB. If you are using managed switch you can create VLAN, you can secure ports and many other things.
Can STP be configured on an HP server?
Configuring Standard STP Parameters STP is disabled by default on Routing Switches. By default, each port-based VLAN on an HP device runs a separate spanning tree (a separate instance of STP). An HP device has one port-based VLAN (VLAN 1) by default that contains all the device's ports.
What is PVLAN?
A PVLAN on a network is a broadcast domain. All of the hosts on that VLAN can communicate with the other members of the same VLAN. PVLANs allow traffic to be segmented at the data-link layer (layer 2) of the OSI model, limiting the size of the broadcast domain. == == http://www.iyogibusiness.com/ Answer A private VLAN contains switch ports that cannot communicate with each other but can access another network. These ports are called private ports. Each private VLAN contains one or more private ports, and a single uplink port or uplink aggregation group. A typical application is at a hotel where each room has a port that can access the Internet. In this situation it is undesirable to allow communication between rooms. Another application is to simplify IP address assignment. Ports can be isolated from each other while belonging to the same subnet. The network device forwards all traffic received on a private port out the associated VLAN's uplink port, regardless of VLAN ID or MAC destination address. Packets received on an uplink port are forwarded in the normal way (i.e. as for non-private VLANs) for all types of packets. Note that while private VLANs provide isolation at layer 2, layer 3 communication may still be possible
Which statement accurately describes a switch with all access ports assigned to the same VLAN?
Performance is increased by keeping all users in the same Layer 2 network
