0
Which Flag can be set or reset by the programmer and also used to control the operation of the processor?
The flag that can be set or reset by the programmer and is used to control the operation of the processor is the Interrupt Flag (IF). It determines whether the processor will respond to hardware interrupts. By manipulating this flag, a programmer can enable or disable interrupt handling, thus controlling the execution flow of the program in response to external events. Other flags, like the Zero Flag (ZF) or Carry Flag (CF), also provide control over processor operations but are primarily set based on the results of arithmetic operations rather than directly manipulated by the programmer.
What else can I help you with?
Is there a fuel reset or computer reset on a 86 s10 blazer with a 2.8 and if so where?
There is a small button on the computer labeled "reset", press it.
How do you get BACK to see your netgear page so that you can undo what you accidentally did - I selected turn access control on and then lost wireless access to my own router page to undo that?
You might choose option do not allow edit settings through wireless. If you have the password you have a choices to connect to the router directly using a lan cable and change your settings. If it didn't work just reset the router settings which is the worst scenario but you don't have much of choice. Each router has a reset button, read the manual to find out how to reset your router.
What is the function of the system clipboard?
The system clipboard is a temporary storage location where information such as text or images are stored. It is loaded when a "copy" or "cut" is selected either with a menu or keyboard selection (such as control-s or control-x). Information can be retrieved multiple times with a "paste' or control-v selection. Information is maintained in the clipboard until it is replaced with another copy or cut selection or until it is reset by starting a new user session.
Will my ip change if you reset your router?
The primary thing that happens when you reset your router is that it does back to default settings. This means that the network and wireless settings will need to be reconfigured.
Why isn't my pandigital novel turning on?
Try the reset pin hole on top Must have a different device as the Pandigital novel does not have a reset hole, at least one visible to the naked eye. The top has a slot for a card and a usb port. The manual does not describe a reset hole
What is the difference between conditional and control flags in 8086 microprocessor?
Control Flag Register: The Control Flag Register (CFR), also known as the Program Status Word (PSW), is a register used to control the execution flow and behavior of the processor. It typically stores various control flags that govern different aspects of the CPU's operation. Some common flags found in the Control Flag Register include: Carry Flag (CF): Used to indicate whether an arithmetic operation generated a carry or borrow. Zero Flag (ZF): Indicates whether the result of an operation is zero. Sign Flag (SF): Indicates the sign (positive or negative) of the result. Overflow Flag (OF): Indicates whether an arithmetic operation resulted in an overflow. Interrupt Flag (IF): Determines whether interrupts are enabled or disabled. The Control Flag Register provides control over program execution, including branching, interrupt handling, and arithmetic operations. It helps determine the outcome of operations and can be used for conditional branching based on specific flag states. Conditional Flag Register: The Conditional Flag Register (CFR), also known as the Condition Code Register (CCR) or Status Register (SR), contains flags that reflect the result of the most recent arithmetic or logical operation performed by the processor. These flags are used to perform conditional branching and control the flow of instructions based on specific conditions. The flags present in the Conditional Flag Register can vary depending on the processor architecture, but some common flags include: Zero Flag (ZF): Indicates whether the result of an operation is zero. Sign Flag (SF): Indicates the sign (positive or negative) of the result. Overflow Flag (OF): Indicates whether an arithmetic operation resulted in an overflow. Carry Flag (CF): Used to indicate whether an arithmetic operation generated a carry or borrow. Auxiliary Carry Flag (AF): Indicates a carry or borrow from the lower-order nibble (4 bits) to the higher-order nibble. The Conditional Flag Register is primarily used for conditional jumps or branches, allowing the processor to alter the program flow based on the current flag states. To summarize, the Control Flag Register focuses on controlling the processor's behavior and handling interrupts, while the Conditional Flag Register reflects the outcome of arithmetic and logical operations and enables conditional branching based on flag states.
What does watchdog means in terms of technically?
watchdog timer is a 16 bit counter that resets the processor when it rolls over to zero. The processor can reset the counter or turn it off, but, correctly used, it will reset the processor in case of a code crash
What is the basic function of RESET signal in 8085 microprocessor?
Reset In:A low on this pin 1)Sets the program counter to zero. 2)Resets the interrupt enable and HLDA flip-flops. 3)Tristates the data bus,address bus nd control bus. 4)Affetcs the contents of processor's internal registers randomly. Reset Out:This active high signal indicates that processor is being reset.This signal is synchronized to processor clock nd ir can be used to reset other devices connected in the system ---BalaG Mulate---
What is the Function of the reset line in a processor?
to resart the computer if it crashes or freezes
How do you reset the Windows XP pc?
You can reset the Windows XP by performing a Restore operation.
What is a reset line in a processor?
resets the program counter to zero and restarts execution
Which steps follow 8086 after reset?
The processor executes a JMP FFFF:0000
Reset check engine light on 2003 Chevy 2500hd duramax?
You can either bring it in to a Chevy dealer or use a programmer/tuner to reset the check engine light.
How reset electronic throttle control actuator?
reset Throttle Control Actuator of Nissan / my scanner g-scan and diagun i can reset with this tools or no
What are components of embedded system?
1.processor 2.power supply 3.reset
How do you reset anything you have done in the current operation?
cancel command
Which command resets everything you have done in an operation?
the reset button
