The white one that fits. :)
Here's <a href="http://www.nuggetlab.com/comptia_files/equipmentperif_Molex%20style%20power%20connector.jpg">a picture for you</a>
--
They're not always white, sometime black.
PATA stand for Parallel ATA. You would use an IDE cable for data transfer and a standard power connector IDE power cable. If you're looking for an external kit to read hard drives, look on Newegg.com or TigerDirect.com for a IDE to USB kit.
The one that fits, OVIOUSLY. The one that fits, OVIOUSLY.
The most common name for this plug is Molex.
A technician is installing a new power supply in a computer Which type of power connector should be used to connect to a PATA hard drive?berg mini-molexmolex.20-pin ATX connector
hard drive.
Connect the front panel molex's to every available connector (3-pin molex connector) Or get a new one. I am experiencing the same now.
What two voltages are present on a peripheral power connector?
If you want to build a computer, then you need to make sure that all of the parts are compatible with each other. A computer must have a Power Supply, Motherboard, Processor, Hard Disk, and RAM to function properly. All of these parts screw into the computer case. The first step in building a computer is to make sure that you are properly grounded. Next, install all of the components on the motherboard, before the motherboard goes in the case. Install the compatible RAM into the proper slots on the motherboard. Next, install the processor. Then, attach the fan on top of the processor, to keep the fan from reaching high temperatures. Next, screw the standoffs into the case, to where the motherboard will go. Standoffs prevent the motherboard from touching the case. Then, lay the motherboard onto the case, on top of the standoffs, and screw the motherboard into place. Now, take the 20 or 24-pin AT or ATX cable from the power supply, and connect it to the proper port on the motherboard. Now, you need to connect the Power, Reset, and/or Front USB and Audio connections to the motherboard. Refer to the Owner's Manual for the Motherboard for this. Next, install the Hard Disk. Hard Disks can use either PATA or SATA. SATA operates at faster speeds. You can use either one, depending on the connections on the Hard Drive, and the motherboard. Screw the Hard Drive into the appropriate spot, inside the case. Then, connect the Hard Disk to the motherboard with either a PATA or SATA cable. Then, depending on the connections on the Hard Drive and Power Supply, connect a Molex or a SATA power connector to the Hard Drive. If your Hard Drive has both, only use one of the 2. Do not connect both SATA and Molex power connectors to the same drive. Next, install the CD/DVD drive, if you choose to use one. First, remove the cover for the drive by pushing on the cover, from the inside of the case. Next, slide the drive into the drive bay, from the outside of the case. Then, screw the drive in, using the appropriate screws. Then, connect the CD/DVD drive to the power supply, using either a Molex connector, or a SATA connector, depending on the type of CD/DVD drive, and Power Supply. Then, connect the CD/DVD drive to the Motherboard with either a PATA cable, or a SATA cable, depending on the type of CD/DVD drive, and Motherboard. Next, install the expansion cards into the appropriate slots on the motherboard, if you want to have any. To install an expansion card, first, make sure that there is an interface on the motherboard for the card that you have. Most cards have a PCI interface. First, unscrew the screw that keeps the cover for the expansion card on. Next, carefully insert the card into the appropriate slot on the motherboard. Next, screw the card in, using the appropriate screw. You have now built a computer. Next, connect all of the external peripherals to the external ports. Connect the mouse to either a Serial, Green PS/2, or USB connection. Then, connect the keyboard to either a Violet PS/2 or USB connection. Next, connect the monitor with either a VGA or DVI connection. Next, connect the RJ45 Ethernet cable to the RJ45 port, if you choose to do so. Or, if you are using dialup, connect the RJ11 Phone Line to the appropriate connection. Next, connect the Power connection to the Power Supply. If the Power Supply has a switch, make sure that it is switched to the on position. Next, turn the computer on, and install the Operating System. Make sure that the Operating System is compatible with the hardware in your computer.
A "Berg" connector.
A technician is installing a new power supply in a computer Which type of power connector should be used to connect to a PATA hard drive?berg mini-molexmolex.20-pin ATX connector
the optical drive will connect to the power supply with a connector called molex connecter it is a 4 prong connector
To do this, you need a power adapter (a computer power supply will work great for this). The Drive will have a molex connector on the back for +12 VDC, ground, ground, +5 VDC. Connect a molex connector to that drive with the proper voltages, and the drive should power on. However, it won't be much good without connecting it to a computer motherboard, or drive controller.
There are two cables that connect to the floppy drive in a desktop computer.There is a four pin power cableThere is a ribbon cable that has a part twisted end (the twisted end connects to the floppy drive).
a cable from the power supply to the Berg power connector on the FDD a cable from the 20-pin ATX power connector socket on the motherboard to the Berg power connector on the FDD
It connects the drive to the system power supply.
There are two kinds in common use:Molex - an older standard, but still commonSATA - Serial ATA, a newer standardSee the related links for pictures.
Mini Connector
SATA power connector is a type of power cable with which we can provide Disks power from the mother board. SATA Power cables are connected from sata point on motherboard to the drive.
The atx 12 connector is one of the motherboard power connectors and used for 12 volt power connect for cpu voltage regulator.
power supply