0
How do you connect from host 1 to establish a console session with router 1 using hyper terminal?
To connect from Host 1 to Router 1 using HyperTerminal, first, ensure that the correct serial cable is connected between Host 1's COM port and Router 1's console port. Open HyperTerminal on Host 1 and create a new connection, selecting the appropriate COM port. Configure the connection settings, typically using 9600 baud rate, 8 data bits, no parity, 1 stop bit, and no flow control. Finally, click "Connect" to establish the console session, allowing you to interact with Router 1's command line interface.
What else can I help you with?
Which items are needed to establish a terminal session between a PC and the router for the initial configuration?
Proper console cable Terminal emulation software
Does every snap-in have the ability to connect to a remote computer?
yes it hasexplained belowThe Adminpak.msi file that is available for Windows XP is commonly used to remotely run administrative tasks on Microsoft Windows 2000-based and Microsoft Windows Server 2003-based computers and domains. The Adminpak.msi file includes a version from the Tsmmc.msc file that is called Remote Desktops. This tool (formerly known as Terminal Services Connections) is available as an MMC snap-in.Windows Server 2003 provides the ability to connect to the console (session 0) of a computer by using a Remote Desktop connection. Because of this, a Connect to Console check box is available in the user interface, but this feature only works when you connect to a Windows Server 2003-based computer.It is still possible to use the Remote Desktop tool to connect to a computer that is running Microsoft Windows NT 4.0, Terminal Server Edition, or Windows 2000 Server with Terminal Services enabled, but this creates a regular Remote Desktop Protocol (RDP) session. The option to connect to the console session is ignored.However, if you connect to a Windows XP Professional-based computer with Remote Desktop enabled, you will always connect to the console session whether or not the Connect to Consolecheck box is selected because Windows XP Professional allows only this one specific remote desktop connection.
In which step of conducting the counseling session does the counselor establish an atmosphere of shared purpose?
Opening the session
What two flags are used to establish a session?
Ack & syn
What tab in the remote desktop connection dialog box allows you to specify which windows desktop features clients use within a terminal session?
The "Experience" tab allows you to specify which Windows Desktop features clients can use withing a terminal session.
Which password will allow a user to establish a telnet session with a cisco derive?
cisco
What properties cannot be configured for multiple users at a single time?
Terminal Services session settings
How can I connect 2 guitars to 1 amp for a jam session?
You can use a guitar splitter or an A/B switch pedal to connect two guitars to one amp for a jam session. Just plug both guitars into the splitter or pedal, and then connect the output to the amp. This way, you can easily switch between the two guitars during your jam session.
What role enables users working at another computer on the company network or on the internet to establish a connection to a server and open an application or desktop session?
Remote Desktop Services allows you to access remotely your company's server and open an application or run a desktop session. In Windows Server 2008 and earlier this was referred to as Terminal Services.
To send data through a network what two flags are used to establish a session?
ack & syn
How can I connect two guitars into one amp for a jam session?
To connect two guitars into one amp for a jam session, you can use a guitar splitter or a mixer. Plug each guitar into the splitter or mixer, and then connect the output to the input of the amp. Adjust the volume levels of each guitar to balance the sound.
What sequence of steps will follow in order to establish the session before data can be exchanged?
To establish a session before data exchange, the following sequence of steps typically occurs: Initiation: One party requests a session to communicate with another. Negotiation: The parties agree on session parameters like security protocols and communication methods. Authentication: Each party authenticates the other to ensure trust and security. Data exchange: Once the session is established, data can be securely exchanged between the parties.
