0
IPv6 is just an extended version of the IP using 6 bytes instead of the 4 used since the ARPANET was first defined. It allows a significant expansion of the number of possible internet nodes. Of course it requires a modified packet layout to make room for the extra 2 bytes in each IP and a backward compatibility to older devices that only understand 4 byte IPs.
What else can I help you with?
Differential between ipv4 and ipv6?
1. Describe the main features that differentiate IPv6 from IPv4
What are the uses of ipv6 for commercial?
what is the commercial use of ipv6?
What is the length in bits of a logical IP address IPv4 and IPv6?
32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).
In IPv6 what is the major difference concerning application layer vulnerabilities compared to IPv4?
The major difference concerning application layer vulnerabilities between IPv6 and IPv4 lies in the expanded address space and the complexity of IPv6 features, which can introduce new attack vectors. IPv6 includes mandatory support for IPsec, enhancing security but also complicating implementation, potentially leading to misconfigurations. Additionally, the transition mechanisms (like tunneling) between IPv4 and IPv6 can create vulnerabilities if not properly managed. Overall, while the underlying principles of application layer vulnerabilities remain similar, the increased complexity of IPv6 can present unique challenges.
Does Windows XP support IPv6?
Short answer - yes.You need to be running Service Pack 1 at a minimum.Service Pack 2 has an even more complete IPv6 stack.To enable IPv6 on XP, open a command prompt window and type:C:\> ipv6 /?Did you then see this result?:C:\> ipv6 /?Could not access IPv6 protocol stack - the stack is not installed.To install, please use 'ipv6 install'.If you did get the above result, simply type:C:\> ipv6 installIt will take a few seconds, and then your Windows XP system will be fully IPv6 enabled.
When a Cisco router is being moved from an IPv4 network to a complete IPv6 environment which series of commands would correctly enable IPv6 forwarding and interface addressing?
To enable IPv6 forwarding and configure interface addressing on a Cisco router moving to an IPv6 environment, you would first enter global configuration mode and enable IPv6 routing with the command ipv6 unicast-routing. Next, you would access the specific interface using interface <interface-name> and assign an IPv6 address with the command ipv6 address <ipv6-address>/<prefix-length>. Finally, use the command no shutdown to activate the interface.
Why is ipv6 not available?
IPV6 is relatively new and doesn't work everywhere yet.
How many bits are in an IPv6?
IPv6 uses a 128-bit address space
How many bits are used for an IP address in IPv6?
IN IPv6 we can find 128bits.
What can you use to identify a ipv6 address?
IPv6 address has 2^128 address and IPv6 address is of 16 bytes and is represented in colon hex notation.
How do you have the tunnel interface and the IPv6 Loopback interface as the only connections running IPv6?
by unchecking the check box of IPv6 in local area network properties
What features are provided by NPS?
security plus course storage of configuration data XML files RADIUS shared secret key generator IPv6
