That a cable with a primary function to the computer working properly is loose, thus impairing the computer's ability to work properly.
To troubleshoot a loose cable connection in your computer system, first power off the computer and unplug it. Then, check the cable connections to ensure they are securely plugged in. If a cable is loose, gently push it back into place. Test the connection by powering on the computer and checking if the issue is resolved. If the problem persists, try using a different cable or port to see if that resolves the issue.
A network cable is not plugged in to your computer or to a device on the other end.
get it tightened
There are many potential causes. It may be due to power-saving settings or features on the computer. It could be a failing monitor or monitor cable, or a loose cable. It could be caused by a failing or loose videocard. If there are other problems, such as the computer losing power during these 'black out', refusing to reboot, or other errors, there could be a hardware problem with the computers internals, such as a failing power supply, CPU, motherboard, or RAM.
If you mean reset the computer: remove the battery negative cable for a few minutes.If youhave security codes on the radio write them down before removing the cable. Replace the cable and the ECM should be reset.
neg cable bolted to the body of car.
trip hazardWhat_is_a_network_cable_used_for
Not sure what cable exactly you mean, but the meter is quite appropriate to measure cables in general.
You have to have a special cable which is "cross connection cable" or something like that.
Check for a loose or corroded ground or battery cable Check for a loose or corroded ground or battery cable
Difference between coaxial cable and STP cable used for computer networking?
Ethernet.