0
Quick Tip -- You Can Save Your Favorite Lamp
Like almost anything else in your home, your lamp can wear down over time. Eventually, its switch may stop working or its bulb might flicker constantly, but a quick fix should make your lamp usable again.
First of all, remember to stay safe. Unplug the lamp and remove its bulb. Most lamps top sections that can be unscrewed, which will expose the wires that lead to the lamp's switch. The switch is the only mechanical part of the lamp, so there's a very good chance that the problem's in these wires.
Check the wiring leading to the switch and see if there are any frays or loose connections. Make sure that the wires are properly attached. If you can't see an obvious problem, the switch itself may have gone bad.
The good news is that most hardware stores carry lamp switches. They tend to be very inexpensive and there's a very good chance that you'll be able to find a switch that matches the broken one. To replace the switch, you'll simply have to unscrew the screw that holds the wiring to the old switch. Put the new switch in place and screw in the wire firmly. Completely reassemble the lamp before you try the switch to see if you've fixed the problem.
In a few minutes, you can fix almost any old lamp with nothing more than a screwdriver and a cheap replacement switch. You'll save money and you'll never have to throw away one of your favorite lamps.
What else can I help you with?
How can someone fix a desk lamp on their own?
For the most part, desk lamps are not too complicated to fix. One will be better off buying the broken parts and replacing them rather than try to fix the broken parts because the parts for a desk lamp are usually inexpensive.
How can I troubleshoot and fix a malfunctioning inline lamp switch?
To troubleshoot and fix a malfunctioning inline lamp switch, first unplug the lamp and check the wiring connections. Make sure all wires are securely connected. If the connections are fine, the switch may need to be replaced. You can purchase a new switch at a hardware store and follow the instructions to install it properly. If you are unsure, it is best to consult a professional electrician for assistance.
How do you fix a broken switch on cars?
Depends on what switch you're referring to. Typically, they'll have to just be replaced.
How do you fix intermittent wipers that do not delay?
perhaps the wiper switch is broken and needs to be replaced.-- The delay part of the Switch.
Your high beams switch is broken in your 2001 Honda accord how can you fix it?
If the high beam switch is broken that it should be replaced. When the unit is replaced the high beams will work again.
How do you fix the brake lights on a 1992 Honda Accord LX already changed fuses that didn't wotk?
if it isn't a fuse or lamp problem, check the brake lamp switch on the brake pedal, if you unplug the switch, and jumper the connection, and you have brake lamps, replace the switch...
What should I do if my light switch is broken?
If your light switch is broken, you should first turn off the power to that switch at the circuit breaker. Then, you can either replace the switch yourself if you are comfortable with electrical work, or call a professional electrician to fix it for you. It's important to address a broken light switch promptly for safety reasons.
What is the name of the separate on-off switch for a lamp?
The separate on-off switch for a lamp is called a "lamp switch" or a "light switch." It allows you to easily turn the lamp on or off without having to unplug it from the outlet.
How do you fix Peugeot 306 brake lights stuck on?
The brake light switch must be broken or out of adjustment.
Why does blinker on 2002 vw passat blink and then stop?
The blinker relay is broken. It is located inside the hazard switch. Replace the switch and it will fix your problem.
How can I turn on the lamp in the living room?
To turn on the lamp in the living room, locate the switch on the lamp cord or base and flip it to the "on" position. If the lamp is connected to a wall switch, make sure the switch is in the "on" position.
Could a broken wire by the brake pedal be the reason the brake lights stopped working?
Yes if the wire is part of the brake lamp switch
