0
What else can I help you with?
What do you get when mix copper sulphate and chlorine bleach?
I made a copper sulphate solution using 1 heaped tablespoon sulphate and 90ml water, boiled it and let it all dissolve. then took some bleach in a syringe squirted it in and... It went brown/black looking exactly like bird poo and it went like a paste instantly after touching the solution.... try it, it was fun! :D
How do you mix copper sulphate with mercury?
Mixing copper sulfate with mercury can be dangerous and should be avoided. The reaction between them can produce toxic mercury vapors and may lead to health risks. It is recommended to handle these chemicals with proper safety precautions and avoid mixing them together.
What is the boiling point of copper sulfate and water?
The boiling point of water is 100 degrees Celsius, while the boiling point of copper sulfate is much higher at around 1500 degrees Celsius. Mixing copper sulfate with water would not change the boiling point of water significantly.
Is there any temperature change on mixing ethanol and water?
No, there is no temperature change when mixing ethanol and water because they form a homogenous solution. The heat released during solvent mixing is offset by the heat absorbed during solvent separation.
Copper sulfate and sodium carbonate physical or chemical change?
When copper sulfate and sodium carbonate are mixed together, a chemical reaction occurs. This reaction forms copper carbonate, a new substance with different properties than the reactants. Therefore, the mixing of copper sulfate and sodium carbonate is a chemical change.
Which single term is used to describe the mixing of copper sulphate and water kept in a beaker on its own?
The term used to describe the mixing of copper sulphate and water in a beaker is "dissolution." This process involves the copper sulphate particles dispersing and mixing with the water to form a homogeneous solution.
Copper sulphate can be made by mixing what acid?
When copper (ii) oxide is mixed with sulphuric acid it produces copper (ii) sulphate. CuO + H2SO4 = CuSO4 + H2O
How do you chemically make copper sulphate?
Copper (II) sulphate, CuSO4 is prepared by mixing copper (II) oxide, CuO with sulfuric acid, H2SO4. CuO + H2SO4 --> CuSO4 + H2O
What term is used to describe the mixing of copper sulphate and water?
The term used to describe the mixing of copper sulfate and water is "dissolving." When copper sulfate is added to water, it dissolves to form a homogeneous solution where the copper sulfate molecules are evenly distributed throughout the water.
Where does the sodium sulphate go when copper sulphate mixes with sodium hydroxide?
Nowhere. I assume you are talking about mixing solutions. The sodium ions and sulpahate ions remain in solution.
Is mixing copper and iron physical or chemical change?
phisical
What single term is used to describe the mixing of copper sulphate and water kept in a beaker on its own?
When copper sulfate is mixed with water in a beaker and left on its own, it forms a homogeneous mixture called a solution.
What is the good substitute for copper sulfate when mixing it with NAOH?
A good substitute for copper sulfate when mixing with sodium hydroxide (NaOH) could be another copper salt such as copper acetate or copper chloride. These salts can provide similar copper ions for chemical reactions while avoiding potential hazards associated with handling copper sulfate. It is important to consider the specific requirements of the reaction when selecting a substitute.
What do you get when mix copper sulphate and chlorine bleach?
I made a copper sulphate solution using 1 heaped tablespoon sulphate and 90ml water, boiled it and let it all dissolve. then took some bleach in a syringe squirted it in and... It went brown/black looking exactly like bird poo and it went like a paste instantly after touching the solution.... try it, it was fun! :D
How do you mix copper sulphate with mercury?
Mixing copper sulfate with mercury can be dangerous and should be avoided. The reaction between them can produce toxic mercury vapors and may lead to health risks. It is recommended to handle these chemicals with proper safety precautions and avoid mixing them together.
What happens when potassium iodide is mixed with copper sulphate?
In the laboratory, copper(I) Iodide is prepared by simply mixing an aqueous solutions of potassium iodide and a soluble copper(II) salt such copper sulphate. : :: Cu2+ + 2I− → CuI2 The CuI2 immediately decomposes to iodine and insoluble copper(I) iodide, releasing I2. : :: 2 CuI2 → 2 CuI + I2
Suggest why magnesium chloride can be made by mixing magnesium with hydrochloric acid but copper chloride cannot be made by mixing copper with hydrochloric acid?
Copper is an inert metal and below hydrogen in electro chemical series therefore can not displaced hydrogen from acids so copper can not be converted directly to salts by reacting with acids, however concentrated sulphuric acid reacts with copper on heating in presence of atmospheric oxygen forming the copper sulphate, chlorides and other salts are prepared from its sulphate salt.
