Nitrogen when comes into contact oil or grease remains neutral,where as gases like oxygen causes explosion when contacts oil and grease.So nitrogen is considered to be the ideal gas for use in accumulators.
Only an inert gas can b used. Any other gas wȋ̊ℓℓ form an Explosive mixture with oil under high pressure. Nitrogen įs d cheapest of inert gases
Nitrogen is used to build up pressue. -Samuel Montgomery
nitrogen can be used for cooling computer systems and for fertilizing plants in a certain way
nitrogen is used in dilution of activity of which gas
It is used to liberate or emancipate ammonia from Nitrogen-containing compounds
Only an inert gas can b used. Any other gas wȋ̊ℓℓ form an Explosive mixture with oil under high pressure. Nitrogen įs d cheapest of inert gases
Because no matter how hot or cold the temperature from friction, or the lack thereof, the pressure stays relatively constant (ie. nitrogen used in race car tires).
A hydraulic accumulator contains a bladder filled with a compressible gas, usually nitrogen. The pressure of the gas in the bladder is known as the pre-charge, and will vary based on the ambient temperature. Hydraulic oil is pumped into the accumulator but outside of the bladder. As the oil is pumped in, the bladder compresses, which exerts a force on the oil. There is usually an pressure transducer in the system which will signal the hydraulic pump to turn off when a certain oil pressure is reached in the accumulator. A hydraulic accumulator can have several uses. It can be used to store hydraulic pressure for later use. It can be also used as a type of "shock absorber" for hydraulic systems.
in 8085 only one accumulator used where in 6800 used two accumulator.
accumulator
using the piping connection and also use meter gauges for measuring purpose.
Mostly used in automatic transmissions, the accumulator piston is located in the accumulator. The accumulator consists of a cylinder and spring loaded piston and is used to provide fluid to the internal shifting servos at a rate higher than the pump can provide. Between shifts, some of the fluid from the pump id diverted to refilling the accumulator for the next shift.
STA is used to store the content of the accumulator in to the specified memory address. for example STA 4200. it stores the content of accumulator at 4200.
To clear only Accumulator & not the Flag Register, you can use: 1) ANI 00 H 2) MVI A, 00 H To clear both Accumulator as well as Flag Register, use: LXI H, 0000 H PUSH H POP A.
Nitrogen is used in the atmosphere by.....
nitrogen is used in fertilizers
nitrogen is used for fertilizer