0
No, a switch is used to control the circuit voltage that is applied to the fixture for turning the fixture on and off. The starter in the fluorescent fixture is used to start the current flowing through the filaments in the fixture's tubes. After a specific time, the starter heats up the circuit is opened and the current then flows through the fluorescent tubes.
What else can I help you with?
Can a single pole switch replace a starter in a tube light?
No. Starter comes in the circuit initially and then cuts off once the tube is on. If you use the switch, it wont be cut off automatically. If you want to use the switch manually then it technically possible to do so
Is it cheaper to leave a fluorescent light on or switch it on and off?
Always cheaper to switch it off and on rather than leaving it on.
How do you install pull chain switch into existing Fluorescent lamp?
Installing a pull chain switch into an existing fluorescent lamp includes both mechanical and electrical issues. One has to change the wires and the switch mounts to have the two be compatible within the same fixture.
What is the single pole and double throw switch?
A single pole switch is the ordinary switch that is used to turn the lights off and on in your home. A double throw switch is also known as a 3-way switch in North America. A double throw switch has a single pole connected to a common screw or terminal, often black. There are 2 additional screws or terminals, often brass colored. In one switch position this pole is connected to one of these screws or terminals and in the other position it connects to the other screw or terminal. If you think of a baseball diamond as an example for this switch, in one position the base line from home to first is hot. In the other position the base line from home to third is hot.
Can a three way switch be changed to a single pole switch with a plate over one of the switch locations?
Yes, If you only hook up two wire it will work as a single pole
Can a single pole switch replace a starter in a fluorescent lamp?
No, a single pole switch cannot replace a starter in a fluorescent lamp. The starter is required to initiate the flow of current through the tube, which a switch alone cannot accomplish. The switch is used for turning the lamp on and off once the starter has activated the lamp.
Can a single pole switch replace a starter in a tube light?
No. Starter comes in the circuit initially and then cuts off once the tube is on. If you use the switch, it wont be cut off automatically. If you want to use the switch manually then it technically possible to do so
How do you replace starter switch for Jd rx95?
To replace the starter switch on a John Deere RX95, first, disconnect the battery to ensure safety. Remove the existing starter switch by unscrewing any mounting screws and disconnecting the wiring harness. Install the new starter switch by connecting the wiring and securing it with screws. Finally, reconnect the battery and test the switch to ensure proper operation.
How do you replace a starter switch in a 1987 Chrysler LeBaron Town and Country Turbo with a tilt wheel?
There is a solonoid on the starter and the ignition switch is on the steering column.
How to replace the electrical relay switch on an 89 Ford F-150?
how do i replace the wires on a starter switch on a 89 ford f-150
What is the necessity of the starter.Can a single pole switch replace it?
A motor starter usually has an overload heater incorporated into it. A single pole switch does not have that type of protection. There are many brands of fractional motor starter switches. These types of switches are sized by the motors full load amperage. These types are dual purpose being that they can be used as the motors isolation switch and also they can be used as motor protection for the connected motor.
Can a single pole switch replaced by starter?
A single pole switch can be replaced by a starter, but it depends on the application. A single pole switch is typically used to control a light or appliance, while a starter is used to initiate the operation of motors, especially in larger electrical systems. If you are looking to control a motor, then using a starter would be appropriate; however, for basic light or appliance control, a single pole switch is sufficient. Always ensure that the replacement meets the electrical requirements and safety standards for your specific application.
How can you replace the starter relay switch on your 2003 Saab?
a relay just plugs in literally
Could it be ign switch 71 ford starter stayed engaged not a constant problem had to turn key further too New starter and solenoid in but now starter kicks in when battery reconnected and key not in?
replace the ignition switch
If your starter periodically spins without engaging the flywheel is it possible that your ignition switch may be faulty?
No. The problem lies in the starter itself. Replace the starter and the vehicle will start....
Why would you only hear a relay switch everytime you try to start a 93 Volkswagen Passat?
That's the starter relay. Replace the starter.
How do you replace 1987 silverado ignition switch?
the truck will not crank or anything with the key it wont even starter when you ark the starter all it does is whizz
