answersLogoWhite

0

The peak of a waveform that is purely sinusoidal (no DC offset) will be RMS * sqrt(2). This is the peak to neutral value. If you are looking for peak to peak, multiply by 2.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

If a building has only 101 volts at the outlets but should be at least 110 volts what could be the problem?

First check voltage at the main and make sure you have 220 volts coming in. Check the voltage at both peak and off peak hours. If you find low voltage at the main lugs contact you local utility provider.


How many amps equal 1800 watts at 110 volts?

To find the amperage, you can use the formula: Amps = Watts/Volts. Plugging in the values, you get Amps = 1800 Watts / 110 Volts ≈ 16.36 Amps.


Which countries use 110 volts?

The United States is one country that uses 110 volts. Also, Mexico and Canada are also other countries that use 110 volts.


How many amps are in 2000 watts using 110 volts?

To calculate the amps, you can use the formula: Amps = Watts / Volts. So, for 2000 watts and 110 volts, 2000 watts / 110 volts equals approximately 18.18 amps.


Are dishwashers typically designed to operate on 110 or 220 volts?

Dishwashers are typically designed to operate on 110 volts.


Can you plug iPod Nano to a 220 volts to charge?

110 volts


How do you calculate the RMS of 440volts 220 volts 110 volts?

RMS stands for root mean squared, and is an easier way to refer to AC voltage. To calculate Vrms, you just take your peak voltage and divide by the square root of 2. Thus, we get the equation Vp/(2^1/2). For power and amperage the calculation is a bit more complicated, but it's very easy for voltage. Therefore your answers, assuming that your given voltages are the peak voltages of the sinusoid, will be 311.12v, 155.56v and 77.78v respectively. If you want to go from the RMS value to the peak value, simply multiply by the square root of two.


What is the value of a westinghouse electric plus mfg co 110 volts DC to 70 Cycles Style 281650 royal electric with cabinet?

As of 2013, the value of the Westinghouse Electric Plus MFG CO 110 volts DC to 70 cycles style number 281650 royal electric with a cabinet is around $549 in good condition. The Westinghouse Electric Plus 110 volt was made in the 1990s.


Are 100 and 110 volts the same?

Of course not, that's 10 volts difference.


How will a 3 phase panel give you 110 volts and 220 volts?

A three phase panel will not give you 110 and 220 volts. A three phase four wire panel will, but not at these voltages. The nearest voltages will be 120 and 208 volts. The 120 volt is the wye voltage of 208 volts. 208/1.73 = 120 volts. A single phase three wire panel will give you 110 and 220 volts.


Does the USA use 110 volts?

Yes, the standard single-phase electrical system in the US is 110/120 volts at 60 Hertz.


Are all ovens 110 volts when you buy them?

In Europe you cannot bye an oven using 110 volts. The word is not only the USA. Actually, most US electric ranges use 220 volts. Microwave ovens and toaster ovens are 110.