0
Answer for countries in Europe and other world areas running a 50 Hz power supply service. This depends on the the light or globe, if you can replace just the globe its very simple. change over the globe and buy yourself a mains(230v or 115v) to 12v isolation transformer, and attach that to the mains cable and run a cable from the 12v to the globe and away you go. The description of how to change the mains to 12v is the same if you have to replace the whole light. Then you just have to replace the globe or the whole light assembly.
What else can I help you with?
What is more efficient to run a pool pump on 120 Volt or 240 Volt?
240
Can a hps light fixture be plugged in to a regular outlet?
If the ballast of the HPS fixture has a 120 volt tap then, yes it can be plugged into a 120 volt receptacle.
Can a 220V light fixture be used in the US?
Yes, you can easily use it. Just install it as you would any other 120 volt light fixture and change the bulb from a 240 volt bulb to a 120 volt bulb. It will work just fine.
Can you wire a 347 volt ballast to a 120 volt fixture?
Yes, but it will not work.
Can you use 120 volt bulb in 130 volt socket?
All other things being equal, an incandescent light should not "flicker" whether it is connected to 120 or 130 VAC.
How to Replace 120 volt pool light with a 12 volt pool light?
To replace a 120 volt pool light with a 12 volt pool light, you will need to ensure that the new light is compatible with your pool's existing wiring and transformer. Consult the manufacturer's instructions for the specific installation steps. It is recommended to hire a professional electrician to safely make this switch.
Can you use a 130 volt swimming pool light bulb in a 120 volt swimming pool socket?
No, it is not recommended to use a 130-volt bulb in a 120-volt socket as it can lead to potential safety hazards. The bulb may burn out prematurely, overheat, or cause damage to the socket and wiring. Always use the recommended voltage bulbs for your light fixtures.
What is more efficient to run a pool pump on 120 Volt or 240 Volt?
240
Can you use 220 volt light bulb on 120 volt system - I know the reverse would probably blow the bulb so wouldn't European 220 Volt do ok in 120 volt socket or would it be dimmer than it normally would?
Yes a 220 volt light bulb will run on a 120 volt circuit but at 1/4 of the wattage that the light bulb is rated at. A 100 watt light bulb on 220 would would be equal to a 25 watt light bult on 120 volt system.
Can a 120 volt light work on 110 power?
Yes, a 120 volt light can work on a 110 volt power supply without any issues. The difference of 10 volts will not significantly impact the function or performance of the light.
How do you know whether to get 120 volt or 130 volt light bulb?
Choose a bulb with the same voltage as your fixture to prevent damage or risk of overheating. If the fixture specifies 120 volts, use a 120-volt bulb. If in doubt, consult the manufacturer's instructions or a professional electrician.
Can a hps light fixture be plugged in to a regular outlet?
If the ballast of the HPS fixture has a 120 volt tap then, yes it can be plugged into a 120 volt receptacle.
Why not put a 12 volt motor to replace the 120 volt motor in your freezer Will this work?
The voltage of 120 volts is more common that the lower voltage of 12 volts.
Can you use a 130 volt light bulb on a 120 volt supply?
Yes, in fact that is what a rough service bulb is rated at. The bulb used on a 120 volt system will have a reduced wattage output as to what it would be on 130 volts.
Can a 220V light fixture be used in the US?
Yes, you can easily use it. Just install it as you would any other 120 volt light fixture and change the bulb from a 240 volt bulb to a 120 volt bulb. It will work just fine.
Does a 120 volt light use less than a 240 volt light?
Not necessarily. The voltage of a light does not directly determine its energy consumption. The power rating of the light (measured in watts) will determine how much electricity it consumes. A 120-volt light may consume more or less energy than a 240-volt light depending on its power rating.
How come you have 48 volts going to a 120 volt light fixture?
It draws 2.5Amps
