rms. dat means Vp-p will be 325V.
rms value
The peak of a waveform that is purely sinusoidal (no DC offset) will be RMS * sqrt(2). This is the peak to neutral value. If you are looking for peak to peak, multiply by 2.
You can work this out yourself. For a sinusoidal waveform the rms value is 0.707 times the peak value. As you quote a peak-to-peak value, this must be halved, first. Incidentally, the symbol for volt is 'V', not 'v'.
Assuming "quoted value" to be RMS value, or average, [what you would see on a meter], the peak would be that value times 1.414. Going backward, peak times .707 is RMS.
RMS is the root mean square value.(in alternating current only)
To convert DC values to AC values if you are wanting RMS values they are the same. 100V DC and 100V AC (RMS) are the same "value". If you want to know the Peak-To-Peak AC value you would multiply the RMS value by 1.414. So 100V AC RMS equals 141.4 V Peak to Peak.
Its 0.7 times peak-0 voltage, 106 mv RMS.
Peak value is 1.414 times the RMS voltage. On a 240 volt circuit the peak voltage is 240 x 1.414 = 339.36 volts. The peak to peak value is twice this.
The peak of a waveform that is purely sinusoidal (no DC offset) will be RMS * sqrt(2). This is the peak to neutral value. If you are looking for peak to peak, multiply by 2.
You can work this out yourself. For a sinusoidal waveform the rms value is 0.707 times the peak value. As you quote a peak-to-peak value, this must be halved, first. Incidentally, the symbol for volt is 'V', not 'v'.
When you say holdhold supply of 230volts, you are referring to the RMS value, not the peak value.
Assuming "quoted value" to be RMS value, or average, [what you would see on a meter], the peak would be that value times 1.414. Going backward, peak times .707 is RMS.
RMS is the root mean square value.(in alternating current only)
A square wave has the highest RMS value. RMS value is simply root-mean-square, and since the square wave spends all of its time at one or the other peak value, then the RMS value is simply the peak value. If you want to quantify the RMS value of other waveforms, then you need to take the RMS of a series of equally spaced samples. You can use calculus to do this, or, for certain waveforms, you can use Cartwright, Kenneth V. 2007. In summary, the RMS value of a square wave of peak value a is a; the RMS value of a sine wave of peak value a is a divided by square root of 2; and the RMS value of a sawtooth wave of peak value a is a divided by cube root of 3; so, in order of decreasing RMS value, you have the square wave, the sine wave, and the sawtooth wave. For more information, please see the Related Link below.
To convert DC values to AC values if you are wanting RMS values they are the same. 100V DC and 100V AC (RMS) are the same "value". If you want to know the Peak-To-Peak AC value you would multiply the RMS value by 1.414. So 100V AC RMS equals 141.4 V Peak to Peak.
Peak voltage will be 1.414 times the RMS. Peak to Peak voltage, assuming no DC offset, will be 2 x 1.414 x the RMS value.
70.7
ANSWER: The peak to peak voltage can be found by multiplying 120 v AC x 2.82= 339.41